It is widely used in low temperature cold areas, the effect of deicing or snow melting significantly.
In winter, the difficult of removing the railway snow, the icy jam of railway crossing and the accumulation of the snow of the roadbed are all our headaches. The security of railway transportation receives much concerns and attention. In order to create a safe, environmentally friendly, low carbon life for people, our company designs the environmentally friendly snowmelt agent for the railway to prevent the icy jam of the railway crossing because of the heavy snow and other terrible weather to make sure the railway in the control, and thus prevent the accidents.It is proved that the special railway environmentally friendly snowmelt agent is not only efficient and 20 times less corrosive compared to ordinary deicing salt .It is difficulty to be icy again . It extends the service life of the railway and protects the roadbed without any pollution and destruction for the railway.Feature:1. It is widely used in low temperature cold areas, the effect of deicing or snow melting is significant.2. It is non-toxic, odorless, environmental pollution, but it can't be eaten.3. It is dampened easily, but non-corrosive to the human health, animals or other objects. Melting of the product can be discharged to the sewer, directly.4. Water self-heating, without the manpower and resources, and other resources, is energy-efficient products.5. When snowmelt, there are no corrosion on steel, concrete pavement, aluminum, and on the roadbed to play an effective role in protection.6. Water resulting from high fever, should be used to prevent spills burn and get protection.7. It is efficient, safe, durable and environmental friendly. The state inspection reports of our snow melting agent:
| Sodium hloride | Calcium hloride | Magnesium hloride | This Snow-removing agent |
Corrosve action on metals | 100% | 50-70% | 40-60% | 5-10% |
2 | Freezing point °C | **** | -15 | **** |
3 | Cadmium % | ≤0.0005 | 0.00021 | Conform |
4 | Chromium % | ≤0.0015 | 0.00031 | Conform |
5 | Mercury % | ≤0.0001 | <0.0001 | Conform |
6 | Concrete corrosion rate % | ≤0.30 | 0 | Conform |
7 | The decay rate of road surface friction % | Wet basis≤16 | 11 | Conform |
8 | Lead % | ≤0.0025 | <0.0025 | Conform |
9 | Dissolution rate g/min | ≥6.0 | 6.3 | Conform |
10 | Deicing or snow melting capacity g/min | Sodium chloride snowmelt capacity 90% | 91 | Conform |
11 | Arsenic % | ≤0.0005 | <0.0005 | Conform |
12 | Carbon steel corrosion rate % | ≤0.18 | 0.004 | Conform |
13 | Exterior | Granules or flakes solid | White flaky solid | Conform |
Performance comparison between this product and other salt snow melting agents:
| Sodium hloride | Calcium hloride | Magnesium hloride | This Snow-removing agent |
Corrosve action on metals | 100% | 50-70% | 40-60% | 5-10% |
Corrosve action on cement (300 times frost thawing ) Corrosve action on cement (300 times frost thawing ) | 100% seriously destroyed | 250% seriously | 5% slightly destroyed | 1% Non-destroyed |
Effect on solis | Cause soli hardened | Slightly hardened | Small effect | Improving alkaline soli |
Effect on undergroud water | Sodium increases, adverse to human body,such as: hypertensionSodium increases, adverse to human body,such as: hypertension | Calcium increases,smaller impact on human body | Magnesium increases, benefit to human body | Magnesium increases, benefit to human body |
Lowest freezing point | -21°C | -50°C | -33°C | -80°C |
Snow melt speed | 100% 100% | 150% | 200% | 200% |
Appropriate working temperature | -1°C to -10°C | -1°C to -30°C | -1°C to -20°C | -1°C to -60°C |
Hold time ( Spray before snow) | 1 day | 1-2 days | 2-3 days | 6-10 days |
Snow-removing and snow melting rates of comparison between this product and other salt snow melting agents:
| Sodium hloride | Calcium hloride | Magnesium hloride | This Snow removing agent |
Temperature | -20 | -20 | -20 | -20 |
Snow melting ( min ) | 190 | 85 | 92 | 2 |
Application: a railroad crossing, railway switch port, rails and high iron on both sides of the subgrade, etc. It can be used for temperatures to thaw the ice in the 0 °C to - 60°C environment. Can also transport icy material such as coal, sand, sub around the cargo of snowmelt agent to prevent icing, solve the problem of difficult to discharge.Specifications: powder or granular.Packing: waterproof packing, 25kg / bag or customized packaging according to customer requirements.Application method: both artificial dispersal or machine spreading, this product can also be dissolved into a solution of different concentrations were sprayed. The use of snowmelt agent process, the user can speed according to snowfall, snowfall, ice thickness, temperature, traffic, etc. and flexibility grasp. Pre-spreading amount of snowmelt agent better.