Ads by Google
MRK-3 Marble crystal powder
1.Amount:First add 2 powder into the bottle and then add 1 water. Tight the cover and shake to evenly.2.Applications:Pre-wet the surface first, in the 3-5 square meters of ground covered with batter in parallel, according to the type and tightness of stone,put the batter 30-40 ml per square meter, immediately use a low-speed single-wipe machine which a white scouring pad with to grind all the batter,(5-6 minutes per square grinding). Careful not to allow slurry to dry! Ddd water to dilute the slurry, to stop the crystallization. Then use the suction machine to draw slurry, and through the water with plenty of water . After crystallization, clean the surface with mild detergent.
| Description | Using method | Feature | |
| Marble crystal powderMK-5 | After renew and clean the stone ( Daily crystal maintain is only to clean the stone), put proper amount crystal powder on the clean and dry surface of marble, use 175rpm polishing machine (Add 1pc add weight is available) together with polishing pad to grind for 3-5 minutes. (Over grinding and machine over weight will affect the construction effect. Some stone will be better when use steel wool.) | This series product via the physical and chemical reaction will form a crystallizing layer to increase the hardness and glossiness of stone, at the same time it not only can protect the stone, but also don't affect the breathability of the stone. |
....