Ads by Google
PVA Product Characteristics and Instruction
fiber finishing agent
1.Product Performance
Polymer is a kind of high polymer. It is white or light yellow floc, Granular or powdery in appearance. Its molecular formula is[CH2CHOH]n,and the molecular formula for some of the PVA is -[CH2CHOH]n-[CH2CHOOCCH3]m-. PVA is non-toxic, insipid and harmless. PVA is water-soluble and the solvent provide good viscosity and film building. It can withstand oils, lubricants, hydrocarbons and most other organic solvents. PVA has better chemical stability and insulatibility, and provide ease in firm building; It possess the typical chemical properties of polyols and can carry out process of esterification, etherealization, aceatalization etc.
2.Product Use
a.textile industry:PVOH is mainly used as a warp dressing agent, textile finishing agent and the raw material of vinylon;
b.construction :upholstery industry 107 glue, it's used as an additive of cement and mortar, inner and outer wall paints, and moulding board binder
c.chemical industry: it's used as a polymer emulsifying agent, dispersing agent and used to produce PVOH formal, PVOH acetal and PVOH butyral.
d.paper industry:It's used as an adhesive in lumbering and paper-making industries.
e. agriculture: used as a soil improving agent, pesticide reinforcing agent and PVOH thin film
f. used as a well-fixing agent in petroleum exploitation.
g. It can also be used into cosmetic, medicine, printing, ceramics, steel-making, electronics and plating.
3.Dissolving Temperature, thickness and time
PVA products dissolvent ability is determined by the degree of alcoholysis and polymerization. When polymerization increased, the ability to dissolve will reduced. Likewise, when the degree of alcoholysis decreased, the dissolvent temperature will reduced and water solubility will increase. Fully alcoholysed PVA products are more sensitive to temperatures changes. Such products cannot dissolve or experience partial swell in properties when temperature falls below required degree. Blending will be difficult and foam created should the temperature exceed the required degree for partial alcoholysis products. Temperature must be controlled at acceptable range for ease of dissolving.
Product Name | Alcoholysis degree(mol/mol) | Viscosity(mPa.s) | sodium acetate(≤) | Volatile constituen(≤) | Ash content(≤) | PH value |
HWE1799 | ≥99.8 | 20.0-32.0 | 7.0 | 8.0 | 3.0 | 7-10 |
HWE2499 | ≥99.8 | 55.0-65.0 | 7.0 | 8.0 | 3.0 | 7-10 |
HWE2099 | ≥99.8 | 32.0-42.0 | 7.0 | 8.0 | 3.0 | 7-10 |
HWE0588 | 86.0-90.0 | 4.0-6.0 | 1.5 | 4 | 0.5 | 5-7 |
HWE1788 | 86.0-90.0 | 20.0-26.0 | 1.5 | 4 | 0.5 | 5-7 |
HWE1799 | 98.0-100 | 21.0-31.0 | 1.5 | 4 | 0.7 | 5-7 |
HWE2088 | 86.0-90.0 | 27.0-34.0 | 1.5 | 4 | 0.5 | 5-7 |
HWE2099 | 98.0-100 | 35.0-44.0 | 1.5 | 4 | 0.7 | 5-7 |
HWE2488 | 86.0-90.0 | 44.0-50.0 | 1.5 | 4 | 0.5 | 5-7 |
HWE2497 | 96.0-98.0 | 52.0-60.0 | 1.5 | 4 | 0.7 | 5-7 |
HWE2499 | 98.0-100 | 55.0-64.0 | 1.5 | 4 | 0.7 | 5-7 |
HWE2688 | 86.0-90.0 | 50.0-58.0 | 1.5 | 4 | 0.5 | 5-7 |
HWE2699 | 98.0-100 | 64.0-70.0 | 1.5 | 4 | 0.7 | 5-7 |
fiber finishing agent