Ads by Google
1)16 ch video power data balun2)16 isolated camera power3)Format NTSC,PAL,SECAM4)Surge protection5)UTP:RJ-45 cctv balun
PVD 7 Serise Power/Video Balun/Data Combiner Hub(AC24V)
The PVD is passive transceiver device that combines video, PTZ data and camera power over a single 4-pair UTP cable to simplify CCTV instllations in a structured wiring environment.
Features:
Combines video ,power and data into a single Rj-45 4-pair cable
Use with the power-video-data transceiver at the camera
16 isolated camera power, 1 A max per channal
Built-in passive transceivers with surge protection
60 dB cross talk and noise immunity
Designed for structured wiring applications
Technical Specifications:
Video Format NTSC,PAL,SECAM
Frequency:DC to 8MHz
Coax:75 Ohms
Twisted Pair:100 Ohms
CMRR:60 dB
Power fused at 1.5A max/CH.
Connectors Video:BNC
UTP:RJ-45
Power:”Build-in AC220V/110V to AC26V converter
Environmental:
Humidity:0 to 95%,non-condensing
Temperature:Operating:-10°C to +70°C
Storage:-30°C to +70°C
Mechanical:
PVD-704J&B:160x170x55mm
PVD-716J&B:430x260x55mm
Wire Type
The PVD system operates well with Cat5 or better UTP wire,24 AWG(0.5mm)or thicker.
Low voltage camera power video may be sent within same wire bundle.
Do not use shielded twisted-pair wire.
Do not use un-twisted wire.
Do not run 24V/28VAC within same wire bundle with telecom or other datacom signals
Power-Distance Chart
Using PVD products, cameras can be powered at extended distances,please refer to the chart below for more information.
Power Supply Voltage | 26VAC |
Resultant Camera Voltage | 20VDC |
100 mA Camera | 600m |
300 mA Camera | 200m |
500 mA Camera | 120m |
1 A Camera | 60m |
The PVD7 Series is advanced device that combines video ,PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installstions in a structured wiring environment. MID series is designed to be placed at a location between the cameras and control room to extend the video up to 1200m(Application Diagram 2),END series is designed to be installed at the control room(Application Diagram 1).
The PVD7 series has built-in DC26V power supply. Each camera power output is equipped with a self-resetting fuse for extra protection.
At the camera end the single channel PVD video balun combiner provides video,power and data on separate outputs. The PVD 7 series should be installed at the”head-end” or “mid-span”.The END series video connections are through BNC connectors and Coax cables to the DVR. The MID series video signals are connected through RJ45 and Category-5 cables to passive or active UTP receivers at the control room.The data connections to the DVR are through RJ-45 and Category-5 cables.All equipment follows industry-standard TIA/EIA 568B pinouts. The PVD series is an ideal CCTV component for a structured cabling environment.
16 channel video power data balun