PS Foam Gun CE certificate plastic handle,light weight newly improved adjust wheel easy to handle quality guaranteed by CE

PS foam gun

Feature:

new design,high qualityefficiency

Main purpose:

heat preservation stuffing of doors/windowssealing, blockingwaterproofing of pipelines

Instructions:

Rocking the pu foam pot harshly before setting on the pistole.Rolling the pu foam pot to the adapter(not too tight).Pull the trigger and let the pu foam flow out for 2 seconds in order to fill the gun barrel with pu foam without air or other gas.The pu foam pot should  be vertical to the earth level when workingControl the pu foam flowing rate by adjusting the adjustment wheel.Rock a new pu foam pot beforing changing it and put the new one on the gun as soon as the old one is put down(in 1 minute).No other substances is allowed to get into the adapter when changing the pu foam pot, since it would stick the gun inside if something goes in.Not seperated, the gun and the pu foam pot should both be put vertically when not working.For washing and cleaning, the detergent should be put inside immediately after taking down the pu foam pot and should not be taken away until working next time.Fix the needle on the nozzle when working. But note: The needle should be taken apart from the gun and cleaned, and no hardware is allowed to clean the needle, since it may hurt the needle and lead to leakage.Handle with care.

 

Accessories

Adjustment wheel

Spring

Adapter

Gun body

Needle

Barrel

Nozzle

Handle bolt

Gasket screw

Trigger

Handle

Handle nut

Material

Plastic

Steel

Zinc

Plastic

Steel

Brass and steel

brass

/

Brass

Steel

Plastic

/

Foam Gun