1.Same quality but lowest price 2.Sample for free 3.Producing according customer request 4.Accept OEM

             

ShangHai DSKS Molecular Sieve CO.,Ltd

Molecular Sieve 13X

Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals.It will adsorb molecules with a kinetic diameter of less than 9 angstroms(0.9nm) and exclude molecular of larger than 0.9nm.

It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen good mass transfer rates.it usually used as carrier for catalysts.

Property	Uint	Bead		Note
Diameter	Mm	1.6-2.5	3-5
StaticH2O Adsorption	%wt	≥26	≥26	RH20%,25°C
CO2 Adsorption	%wt	≥17.5	≥17.5	250mmHg,25°C
Bulk Density	g/ml	≥0.65	≥0.65	Settled
Loss on Attrition	%wt	≤0.10	≤0.10
Loss on Ignition	%wt	≤1.50	≤1.50	575°C,1H
Crush Strength	N	≥30	≥80
Partical Ratio	%	≥97	≥99

Recommended application:

·Removal of CO2 and moisture from air(air pre-purification)and other gases.

·Separation of enriched oxygen from air.

·Removal of mercaptans and hydrpogen sulphide from hydrocarbon liquid streams such as LPG, butane, propane etc.

·Catalyst protection,removal of oxygenates from hydrocarbons (olefin streams).

·Removal of n-chained compositions from aromatics.

·Production of medical or bulk oxygen in PSA uints.

·Removal of impurities for special gases,such as SF6.

Packing:

·140kg air-tight iron drum.

·25 kg/carton,and each carton has inner PE bag.

·Other packing according to your requirement.

Instruction: Prevent molecular sieve from exposing directly to the air.

Warning: Molecular sieve adsorption activity is an exothermic reaction, any contact to human body is dangerous.