4 cameras capture video images of 4 different views Synthesized image is projected onto a virtual roadway Video system: NTSCOperating voltage: 9 to 24VOperating current: 0.5AInput signal amplitude: 75ΩOperating temperature: -20 to 70°CStorage temperature: -40 to 80°C

Package details:

1. Central control lines  (1 set)2. Control Board  (1 pc)3. Wide angle CMOS cameras (front & rear)+ 6M power cord  (2sets)4. Wide angle CMOS cameras (left & right)+ 3M power cord  (2sets)

5. Remote   (1 pc)6. hole puncher    (1 pc)

Function:

A ) Intelligent Parking Assist

By watching the images from display not the rearview mirror to judge the distance between car and roadblock while driver is backing car. Fewer mistakes on judgment.

B) Expand vision scope

When it makes a turn, front & back 180 degree range of image could be seen through the display equipment; Knowing if there are cars on straight direction without move out.

C) Pass by the narrow road & meet vehicles

The distance between car body and left & right obstacle could be clearly seen by left & right cameras. Help you pass narrow road & complicated section easily.

D) Driving trajectory correcting

When the car is moving on, keep the front view camera working; if the car offsets track, it will show on the display to help correcting the driving trajectory.

E) “Black Box” function

In case of any accident or car scraping, our system can store images of every direction to SD card ; This data will be used for technical evaluation during events.

Install the front view camera

1.Open the hood, drill hole in available position of car logo, lead the camera cable through the hole to engine cover.

2.Arrange the cables along with edge of car head end to gauge board.

Install the left &right view camera

Open the door, separate the door cover and remove the left & right rearview mirror from the door.Disconnect the mirror lens, and make a hole at the bottom of rearview mirror frame with size 18.5MMSeparate the rearview mirror frame & frame holder.Fix the left or right camera on the hole, and arrange cables well.Assemble the rearview mirror and connect to the door, tie well & lead the camera cables to the bottom of gauge board.; reinstall the door cover.

Install the rearview camera----Installment procedure same as front view camera

Install the control board

Separate the gauge boardPut bird view control board video cable & DVD original video cable connectedPut other control wires of control board & car switching circuit connectedConnect with left/right camera video cable & left/right turning signal lamp.

360 degree around birdview parking assistance system