Ads by Google
Adapter sleeve (H)
Adapter sleeves are the most commonly used components for locating bearings that has a tapered bore, onto cylindrical shaft
seating’s as they can be employed both on smooth shafts and stepped shafts.
They are easy to mount and require no additional fixation on the shaft. Using adapter sleeves on smooth shafts, the bearing
can be located at any position on the shaft . EESCO adapter sleeves are supplied complete with lock nut and locking device.
Adapter sleeve for oil injection (OH)
These sleeves have an oil supply duct (or ducts) at the threaded side of the sleeve and distributor grooves in the bore as well
as the outside surface.Sleeves up to and including size 40 have on supply duct, larger sleeves have two.
Withdrawal sleeve (AH)
Withdrawal sleeves can be used to mount bearings with tapered bore on cylindrical seating’s of stepped shafts. The sleeve is
pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft
by a nut or an end plate. The sleeves are slotted and have an external taper of 1:12 or 1:30.
Withdrawal sleeves for oil injection (AOH)
These AOH sleeves have two oil supply ducts at the threaded side as well as oil distributor grooves in the circumferential and
axial directions, both in the outside surface and the sleeve bore. If oil is injected through these ducts and grooves, an oil film is
formed between the mating surfaces of the bearing and sleeve and between the shaft and sleeve, and the force required to
mount the bearing is considerably reduced
Below are some Adapter Sleeve Bearing we can supply:
1.Adapter Sleeve:
H200 Series: H204 - 222
H300 Series: H304 - 322
H3100 Series: H3120 - 3196
H3000 Series: H3024 - 3096
H2300 Series: H2304 - 2356
H3200 Series: H3260 - 3296
2.Withdrawal Sleeve:
AH200 Series: AH208 - 256
AH300 Series: AH308 - 334
AH3000 Series: AH3024 - 3096
AH3100 Series: AH3120 - 3196
AH2300 Series: AH2308 - 2356
AH3200 Series: AH3218 - 3296
adapter sleeve H2326