1,New type building material 2,Widely used for the masonry of variable construction internal partition walls 3,High quality

Our company makes full use of the advanced characteristics of vaviable,all products are extrusion molded at high pressure in vacuum and sintered at 1000 Celsius degrees to form without problems of scumming,cracking,layering,scaling,missing corner and so on,both of lime blowing and radioactivity index meet related standard requirement .For many years,the company gradually has formed production capability of full-classification and multi-series,which may satisfy variable construction works and road pavements.

Product specification and masonry method 

Non-load bearing shale insulating brick
Wall thickness(mm)	Dimension speci-fication(mm)	Masonry method	Wall heat transmission coefficient(w/m2.k)
280	240*260*90	Full-filling,'row-lock wall formed by stretcher course and header course in turu',the wall is internaly sandwiched with a polystyrene board of 80 mmthickness.	0.35
		Half-filling,'row-lock wall formed by stretcher course and header course in turu',the wall is internaly sandwiched with a polystyrene board of 80 mmthickness.	0.48
		Full-filling,common stretcher course masonry method	0.41
310	240*290*90	Full-filling,'row-lock wall formed by stretcher course and header course in turu',the wall is internaly sandwiched with a polystyrene board of 90 mmthickness.	0.31
		Half-filling,'row-lock wall formed by stretcher course and header course in turu',the wall is internaly sandwiched with a polystyrene board of 90 mmthickness.	0.44
		Full-filling,common stretcher course masonry method	0.36

Product characteristics

Good heat preserving performance     

After being on-site traced and tested by the construction test centre,the average heat conductin cofficient of each kind of masonry wall made of Non-load-bearing-thermal  is lessthan 0.50.whichmay accord with the requirement of energy conservation for above 65%.      

High engineering quality         

Non-load-bearing-thermal with average compressive strength of above Mu 3.5,low water absorption and small dry shrinkage  may solve the common quality fault that the non-load-bearing wall surfacecracks and the big problem that the externally hung heat insulating material and the main body construction cannot be synchronizedin service life perfectly.     

Low construction        

Non-load-bearing-thermal is convenient in construction without external heat insulating process,so as to reduce the construction cost 30% and largely increargely increase the secure performance of the constrnction.

Applying Cases

Quality Certification