A)spring wing type hollow wall anchor designed. B)Sizes from 1/8" x 2" to 3/8" x 6" C)Finish:Zinc Plated D)ISO-quaility

The toggle bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The toggle bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 1/8" diameter x 2" length to 1/2" diameter x 6" length with combo round, flat mushroom, tie-wire or slotted hex head styles.Adjustable to accommodate various wall thickness up to 2 1/2"Easy to use and works in a variety of base materials

SPECIFICATIONS

Size Drill Hole Pull out load kgs 1/8 or M3 3/8 -10mm 130 M4 1.5mm 150 3/16 1/2 200 M5 14.5mm 200 1/4, or M6 5/8-16mm 500 5/16 or M8 7/8 500 3/8, or M10 7/8 550 1/2, or M12 1-1/4 680

 Installation

*Drill the required hole through the base material. the tolerances of the drill bit used should meet the requirements of ANSI Standard B212.14. In denser materials such as high strength concrete, drill the hole 1/16'' larger.

*Insert the bolt through the fixture to be fastened, thread on wings, then fold the wings completely back and insert through the hole until wings spring open.

*Pull back on assembly to hold the wings inside the wall to prevent the wings from spinning while tightening bolt. Turn the bolt with the screwdriver until firmly tightened.

  

Toggle Bolt anchor