Ads by Google
A : use with the following base materials:
Concrete | Brick | Block | Mortar |
B : features of products
•Sheet metal screws are used to expand anchor .•Made from a zinc alloy,die cast material .•Rust-resistan .•Longer length anchors used in softer base material .
C : how to use
1.drill a hole using the specified carbide tipped bit in the technical information table.
2.the drilled hole should be 1/8”deeper than anchor length for flush mounting.
3.blow the hole clean.
4.insert anchor into hole.
5.tap with hammer until flush with surface of base material.
6.positon fixture ;insert screw and tighten.
Leadwood screw anchor are available in three lengths-3/4”,1”,and1 1/2”,Alonger leadwood screw anchor should be used when installing into softer base materials.These concrete fasteners are best used in light duty fastening applications with dead loads only.Anchors are made of zinc alloy,die cast material.All leadwood screws from Concrete Fasteners .com are also rust resistant and can withhold 3000 PSl concrete tension of up to 415.
Ultimate Holding Values-CONCRETE"
A:INCH
Item Number | Screw Size Inches | Anchor Length Inches | Hote Size Inches | 3000PSl Concrete Tension | Box Quantity |
SY6334 | 6-8 | 3/4 | 1/4 | 183 | 100 |
SY6100 | 6-8 | 1 | 1/4 | 183 | 100 |
SY6112 | 6-8 | 1-1/2 | 1/4 | 183 | 100 |
SY1034 | 10-14 | 3/4 | 5/16 | 310 | 100 |
SY10100 | 10-14 | 1 | 5/16 | 310 | 100 |
SY10112 | 10-14 | 1-1/2 | 5/16 | 310 | 100 |
SY16100 | 16-18 | 1 | 3/8 | 415 | 100 |
SY16112 | 16-18 | 1-1/2 | 3/8 | 415 | 100 |
Workroom show:
Raw Materialwarehouse show:
lead wood screw anchor blot