Ads by Google
Car Blind Spot Sensor Osram chip BLIS
A new product has been pushed into the market !
For our this Blis , it is used the Osram chip to make it .The quality is very good !
Why need Car Blind spots information system?
------blind area always:
----- Raining Day and Fog Time, Accident Peak Time
----- So Hard to Drive at Night:
----- Dangerous Visual Error:
----- Check Backside by Turning Head Back Will Cause Rear End:
----- Time Difference Aso Fatal:
----- when you can overtake ,when you can Changing Lanes
How the BLIS working?
The laser eradiate sensor fixed below the side mirror by appropriate angel,
eradiate laser at the frequency of more than 200 000 times/seconds,
when another car enter the detecting area, ( About 13M from the mirror to the behind obstacle),
the small alarm light beside A pillar will shining or alarming few times, to remind drivers careful change road.
And the effect will not effect by weather or time.
Which Car Already Have Blind Spot Monitor System:
Ford Edge
Cadillac Seville Luxury Sedan
Volvo XC60
Jaguar XF
Volkswagen Phaeton
Audi Q7
Benz S Class
Land Rover Range Rover
Car Blind Spot Detection System Parameter:
Average Power: 15W average power
Input Voltage (Vin): 9~16V
Rated voltage (V nom): 12
Rated current (I nom): 0.1A
Maximum current (I max): 7.5A
working temperature: -40°C~+105°C
Working distance: length :0~50m wide :3M (will become a sector in 3M *9.5M)
Install model: install horizontally below the side mirror
Install angle: 28~31 with the vehicle ordinate axis centerline
After the car's speed over 60KM/hour,can be detected by the BLIS when range in 50M
Car Blind Spot Sensor Osram chip BLIS