Ads by Google
The models we list below are part of our existing designs. we can customized them after evaluation if you can specify your own needs like voltage, speed, torque front shaft length and so on.
Model No. | Main Performance | |||||||||
Rated Voltage | No Load | At Maximum Efficiency | At Stall | |||||||
Speed | Current | Speed | Current | Torque | Output | Eff. | Current | Torque | ||
V | r/min | A | r/min | A | g.cm | W | % | A | g.cm | |
RS-365PH-09270 | 12.0 CONST | 2,930 | 0.036 | 2,192 | 0.095 | 28.4 | 0.63 | 54.91 | 0.28 | 105 |
Model No. | RS-365PHVC-13136L | |
Rated voltage | 12VDC | |
No Load | Speed(RPM) | 5500 |
Current(A) | 0.12 | |
At Max Efficiency | Speed(RPM) | 4181 |
Current(A) | 0.38 | |
Torque(mNm) | 5.2 | |
Output(W) | 2.27 | |
Eff.(%) | 49.9 | |
At stall | Torque(mNm) | 21.6 |
Current(A) | 1.2 |
Unit Conversion: 1g.cm≈0.098mN.m≈0.014oz.in 1mm=0.039in 1g=0.035oz
Basic Structure of Chengfang Motors 2-pole statorSr ferrite permanent magnet3, 5, 7, 8, 9, 12,16 slots armatureSilicon-steel lamination with epoxy coatingHigh-carbon steel shaftCu-Ag alloy commutatorCopper-graphite brushesBe-Cu leaf-brush commutating systemSECD round / flat type housingSECD end cap / glassfiber reinforced PA6/6 end capCylinder / self-aligning Cu-Fe alloy sintered bushes155oC (class F) magnet wire↓ ↓ ↓ ↓ ↓ | Customized Options Leadwires with connector / pinsEMI suppression componentsPTC or thermostate protectionBuilt-in AC/DC rectifierBuilt-in cooling fanMultiple output shaft diamond knurls, straight knurls, D-cut, stepped shaftShaft-mounted gears, eccentric gears, belt pulleysStainless steel (SS304, SS420) shaftBall bearingCage-brush commutating systemPrecious metal brush / commutatorHall encoderLow-cogging torque design180oC (class H), 200oC (class C) magnet wire-40oC ~ 220oC bearing lubricantNeodymium magnets |
12v dc motor with low noise motor,low rmp motor,used for copy machine and hair dryer motor