Most popular in all over the world Leading the trends of car lighting sources No puluution, no noise , no electronic int

car door light car project lamp 

 if contact with yellow and red wire together ,it will flash.

Product Size:22X35MM

1.Voltage:DC 10V-18V.    /12V-24V

2.Power: 3W .LED is CREE FROM USA = 7 w china or taiwan led (cree website:www.cree.com)

3.Decorative lights 

4.Wire:2meter

5.Working temperature: -40°C to + 105°C

6.2pcs/set.

u will get  2PCS light and use manual(u can choose your words) in one bag

 As the decorative shadow light,when you stop the car,shadow could be showed on the road .Bring more driving fun to drivers 

Model:

Benz/ BMW/ Audi/ VW/ Honda/ Toyota/ Nissan/ Buick/ Mazda/ KIA/

Suzuki/ Ford/ Land Rover/ peugeot/ Mini/ HYunda/ Porsche/ Mitsubishi

K2/ K5/ Chevrolet/ JP/ Acura/ Lexus/ Infiniti/ Opel/ 

ect..

1.Environment friendly and power saving.

2.Durable and non-fading brilliant beams.

3.Elegant exterior packaging

4.Light for Power cord: 2.0Meters

5.Designed for auto modification fancier. 

 LED car logo shadow light User Manuel: 1. This product is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers;2. The product can be installed at the body kit, chassis or other suitable place; 3. Special design cause the product with strict waterproof and thermal performance,which will make sure the normal service in various harsh environment LED car logo shadow light Installation: 1. Make sure the position for installing, It can be installed on the coaming and chassis or other right  position; The best projection distance is 30mm for the projection light. 2. Fixed the stand of the projection light on the Car with a screwdriver. 3. Adjust the lamp holder to the best position.Tighten the fixed-screw at the bottom of the light cup. 4. Connect the power cord and remote control according to the installation guide

car logo light car door light car project lamp flash