HID kit, HID xenon kit
HID kit,HID xenon kit,hid car kit
Single bean hid kit(Single xenon bulb: 880 881 889 9004 9005 9006 9007 H1 H3 H7 H8 H9 H10 H11 H13 D2R/C/S )
HID kit, HID xenon kit
HID kits one xenon & one halogen bulb( H4/H, H4/L, 9004/H, 9004/L, 9007/H, 9007/L, H13/H,H13/L )
HID kit, HID xenon kit
HID kits High/Low (Bi-xenon) kit ( H4/H-L, 9004/H-L, 9007/H-L, H13/H-L )
HID kit Specifications:
Rated Voltage: 12V
Rated Power: 35W
Bulb Type: all kind of Single beam, H/L halogen/xenon, High/Low beam
Life time: more than 5,0000 hours
HID Color Available:3000k~golden color 4300k~yellow white6000k~shallow yellow8000k~blue white10000k~Cambridge blue12000k~ Bluish-purplish 15000k~blue red20000k~pink25000k~mauve30000k~purple
Packaging Details: 2 x HID Bulbs, 2 x Ballasts, 2 x Secure Mounting Brackets, Fixation buckle of wirex8, Screwx2, Installation Manualx1, soft color box x 1
HID kit Bulb type: 1) Single xenon bulb: 880 881 889 9004 9005 9006 9007 H1 H3 H7 H8 H9 H10 H11 H13 D2R/C/S 2) One xenon & one halogen bulb(halogen/xenon): H4/H, H4/L, 9004/H, 9004/L, 9007/H, 9007/L, H13/H,H13/L 3) Single xenon bulb with spring retractable(Bi-xenon): H4/H-L, 9004/H-L, 9007/H-L, H13/H-L
HID kits Advantages:
1.The lightest and smallest ballast in the world.2.The ballast can adapt to all the HID bulbs in the market.3.The circuit board is six floor stucture ,less interference, and more suitable for ballast.4.Pass the test of working in the bad environment between the low temperature of -40 centigrade,hight temperature of 100 centigrade.5.Digital chip control,the main raw materials are came from the IR, fair child and such kinds of international factory.6.Using the hight heat and pressure resistance silica gel wire.7.The wires is covered,artistic,waterproof and dustproof.8.There parts of the kit are designed to be detachble which is so convenience.9.There bulb and ballast are aging together,more perfect in matching.10.The lightest and smallest ballast in the world, appropriate for 99% cars.
HID kit Installation:
1.Open the rear cover of the headlamp and pull the installed halogen lamp out.2.Drill a hole in the middle of the rear cover with a hole cutter.3.Put the HID lamp into the headlamp unit.4.Fix the ballast on the rear cover and get the wires through the hole of the rear cover.5.Connect the wires and twine the connective part with insulating tape.6.Put the rear cover back and make it tightened.
2013 superb HID kit