1.imported stent-chain feeding system 2.90degree corner wheel,non-repair 3.driving device can be installed in any installation

The technical parameters of Egg incubator:

Length:1520mm

Width:960mm

Height:860mm

The framework uses national standard 0.5mm hot galvanized

Care egg plate uses plastic

Plate under the bracket:1.5mm 

Plate above the branket:1.2mm

installing examples of chain conveyor system:power of motor 2.2KW,380V length of feeding line  180-300m                    1.5KW,380V length of feeding line>180m

poultry raising equipment:

The importe feeding chain is expected to ensure rapid and timely deliery, avoiding uneven speed, with capacity of 0.7-1.5kg per meter ,which can be adjusted at the bottom plastic stent.

Drive setsInstalled in any location of the feed line,single or two-way, can reach the speed of 36 meters per minute. A solid base and rotating sprocket guarantee the stable operation. It has a pin device for safety. The device can operate automatically and manually,day and night. .

90-degree durable corner wheel, free of repair1   Wheel sets by the metallurgical powder,oiling-free                                                                 

2  The wheel channel is made of strengthened special cast steel materials.3 Static-free powder coating treatment.

Feed line distribution box,feed trough joint,steel,90° corner wheel,corner wheel cover,take-off and landing stent,hot galvanized feed trough,areospace metal chain,hot galvanized steel grille,the chain of finished products and big feed container.

5-13 tons feed tower,main feed line,Auger

It is stated as

automatic chain style feeder conveyor system for breeder