Ads by Google
LED Display Professional Power Amplifier DSP400
1.DSP series amplifier uses particular MIRRORED FRONTED POWER SUPPLY BRIDGE to make the symmetrical circuit design.
2.With power automatical switch system, power parallel connection in low power can increase the output current.
3.The circuit with shield cover adds shield ring to transformer for less noise. The LED panel has level, power supply and temperature for channels display.
4.It can change speed of fans according to the channel temperature, ensuring the cooling. It can also protect the amplifier while over heating to abnormal power supply.
5.Have perfect protect function, power on amortize, dalay connect speaker, limited function, over-current protect, over-heat, shot-cut protect and output DC protect etc.
SPECIFICATION:
Model | DSP400 | DSP600 | DSP800 | DSP1000 | DSP1200 | DSP1400 |
Out Power(8Ω) | 2x400W | 2x600W | 2x800W | 2x1000W | 2x1200W | 2x1400W |
Out Power(4Ω) | 2x650W | 2x950W | 2x1300W | 2x1600W | 2x1800W | 2x2100W |
Out Power(2Ω) | 2x950W | 2x1400W | 2x1900W | 2x2400W | 2x2700W | 2x3000W |
Bridge(8Ω) | 1300W | 1900W | 2600W | 3200W | 3600W | 4200W |
Bridge(8Ω) | 1900W | 2800W | 3800W | 4800W | 5400W | 6000W |
Input Impedance | 20KΩ | |||||
Frequency Response | 20Hz ~ 20KHz | |||||
T.H.D | 0.05% | |||||
Slew Rate | 80V/usec | |||||
Hum and Noise | 103dB | |||||
Damp Modulus(8Ω) | >500 | |||||
Radiator | High/Low Automatism Control | |||||
Safeguard | DC Safeguard/Out Overloading/Boot-strap Short Test | |||||
Power Supply | AC115V-240V 50~60Hz | |||||
Net Weight(KGS) | 23.5 | 26.0 | 27.0 | 33.0 | 34.0 | 35.5 |
Dimension(MM) | 482×453×88.8 | 482×468×132 | ||||
LED Display Professional Power Amplifier DSP400