Ads by Google
HDG,PPGI,GA,GI steel coil GLAluminum Zinc Coated Steel Coil
Zincalume Steel Coil ,Galvalume Steel Coil
Hot Dipped Galvalume Steel Coil
Aluminium Zinc Alloy Coated Steel Coil ,Galvalume
Steel Grde :SGCC ,SPCC ,D51D ,D54D
Thickness :0.15-2.0mm ,width :max 1260mm
AZ coating:AZ30-AZ180 or follow customer ‘s request
Applicatiom : Base material for prepained colour steel coils ,and also for construction industr ,roof structure ,keel ,grill ,ceilings ,agriculture ,cashing of househole ,electronic application ,etc
Surface :Anti-finger ,Skin-Passed ,Chromated
Spangles :Regular /Small /Zero /minuzum
Packing : Seaworthy standard export packing or customer’s request
PPGI/ppgl is prepainted , also known as precoated steel, coil coated steel, color coated steel etc.A galvanised steel sheet in form is cleaned, pretreated, applied with various layers of organic coatings which can be , dispersions, or .These coatings are applied in a continuous process known as Coil Coating.The steel thus produced in this process is a prepainted, prefinished ready to use material. PPGI is the material which uses galvanised steel as the basic substrate . There could be other substrates such as , Galvalume, , etc.
Characteristics:
Corrosion protection Long life-time for coated colorProduct Specification:
Basic Substrate: cold rolled HDG / Galvalmue
Quality: CQ DQ
Application:
Outdoor: roof, roof structure, surface sheet of balcony, frame of window, door, door of garage, roller shutter door, booth, Persian blinds, cabana, refrigerated wagon and so on.Indoor: door, isolater, frame of door, light steel structure of house, sliding door, folding screen, ceiling, internal decoration of toilet and elevator.
Notes for processing of color coated steel sheet
Notes for curving:
a. Remove the remainder and roast attached to the parts in stamping processing as they may cause scratch ,dent and reduce the durability. b. As the outer edge of curved part could be elongated after processing, slight wrinkle may be generated, but not a problem yet. Maximizing the curving rate of processing part could eliminate this defect. c. Thickness of coating layer should be taken into account when setting the clearance between punch and die. d. As the coating appliqué may become fragile when temperature is too low, thus wrinkle, sink and slipping may arise during the processing in low temperature. Deformation processing should be avoided when the temperature of steel sheet is lower than 21 .Should temperature of environment becomes too low, warming the steel sheet could be a better choice. e. In order to keep the formation roller and surface of steel sheet from damaging and scratch, formation roller (such as quenched steel and mold die) made of hard material should be adopted. Chrome should be galvanized to the surface of roller.f. It is advisable to add protective appliqué onto the surface of color coated steel sheet. When the construction finished, protective appliqué could be removed.
Requirement for transporting the color coated steel sheet
a. Keep the color coated steel sheet far from water and sunshine .It is advisable to store them indoors. b. Should the color coated steel sheet be rained or dewing, please dry them as soon as possible so as to remove humidity. c. Keep the inventory as the same as it shipped from factory, do not stock as piles so as to protect the coating layer.d. It is strongly recommended to consume the steel sheet that comes into the inventory earlier. Otherwise, pollution, scratch and color aberration may arise as steel sheet produced at different date mixed together. e. Transport the steel sheet as it shipped out of factory. Releasing the cushion and reversing the package is highly harmful.f. When unloading the steel sheet or steel coil, rubber cushion and lift must be adopted for the sake of avoiding scratch.g. Clean the carriage of transporting the color coated steel sheet and add rubber cushion or adopt protective instrument .h. Vertical packaging is advised for transporting color coated steel sheet. Coil down ending machine should be used to put the coils horizontally.i. Steel sheet and coils should be fixed well prior to transportation ,otherwise they will move and cause scratch.j. When take out color coated steel sheets, do not pull. Otherwise, flash of cutting section and edge will cause dent and scratches.
HDG,PPGI,GA,GI steel coil GL