Grade: All alloy temper Temper: All temper Type: Coil and plate Application: Building Industry Thickness: 0.15-80.00mm

1. Aluminum sheet offering summary:

Aluminium sheet&Plate

Thickness:

Sheets thickness: 0.15-2.0mm

Plate thickness: 2.0mm-250mm

Alloy: 1000series, 3000series, 5000series, 6000series, 7000series alloy aluminium sheets

Temper: Soft and Variety Hard temper (O-H116) (T2-T6)

Cusotom requirements are acceptable

 

2. Our Aluminium sheets products list including

1. Coil sheet, Mill finish aluminium sheet (MFP),

2. Color coated aluminium sheet

3. Checkered plate(TLP in nickname of , checker plate, Tread plate, diamond plate, chequer plate),

4. Mirror finish aluminium sheet (Mirror reflective aluminium sheet),

5. Anodised aluminium sheet (two side anodised, only silver color available.),

6. Stucco aluminium sheet (orange skin type, variations stucco type),

7. CTP base board,

8. PS base board,

9. CC Lids/cap plate

 

3. Brief Technique information:

Alloy: 5083, 5052, 5005, 6061, 6062, 1050, 1060, 1070, 1235, etc

Temper: O-H116, T2-T6.

Thickness: Light Gauge(0.15mm-2.0mm), Middle Gauge(2.0mm-6.0mm), Thick Plate(6.0mm-200mm)

Width: Max. 2400mm

Length: As required

Sheets Tensile strength and Elongation: offer by customer

 

4. Trading terms

MOQ: 5 tons aluminium sheets or coil

Delivery time: Normally 25 days

Payment: Normally 30% downpayment against leftover balance by sight l/c.

Packing: Wooden pallet and wooden cases

Pricing: Large quantity enjoys certain discount

Port of loading: Qingdao port

Certification: Form A, E, available to offer to market which requires.

Quality: Factory quality test and quality decleration

Remark about the MOQ:

...Stock service:

We are able to offer ware stock service. For aluminium sheets, plates, coils in alloy 1050, 1060, 1100 and other pure aluminium sheets, no matter it is mill finish, stucco or tread plate (in other name, checker plate, checkered plate, chquer plate, chquered plate, diamond plate, propeller plate etc).

...3 tons MOQ condition:

We are able to offer lower MOQ limit in 3 tons and 5 tons. For aluminium sheets, plates, coils in alloy 5052, 5005, 5083 and other 5000series aluminium sheets, no matter it is mill finish, stucco or tread plate (in other name, checker plate, checkered plate, chquer plate, chquered plate, diamond plate, propeller plate etc).

For more detailed information, welcome to contact us.

 

5. Other Information:

 

Main applications:

 

Aluminum sheet are widely used for aluminum and plastic composite board,aluminum and plastic pipe,and bottle/tank cap,as well as curtain wall board/aluminum curtain board,ceiling board/specialshaped ceiling board,aluminium sheets for cable channel,conmestic packging and electrical manufacture,etc.

 

•Building Applications - Pre-painted sheet, Anodised sheet, Roofing Coil, Patterned sheet ( 5 Bar Tread plate and Propeller Plate) 

•Road transportation - Pre-Painted Roofing and Caravan Coil, sheet and plate for the bull bar industry 

•Road signage - Mill Finish and Linished 1.60 and 2.00 5052 H38 grade aluminium from leading manufacturers of aluminium sheet for use in the road sign industry. ALSPEC also carries complementary extrusions to suit. 

•Marine - ALSPEC carries a wide range of sheet and coil for use in local marine markets. 

•General Fabrication - ALSPEC carries a variety of sizes, alloys and finishes to suit a wide range of end use applications. Examples include:

 

•Mill finish 5005, 5052, 5083

•Anodising quality mill finish from Europe 

•PE Coating available 50UM, 80UM, 100UM 

•Pre-painted aluminium coil

 

 Our representation supports worldwide markets that may include:• Architectural products • Marine • Transport • Sign manufacture • Roofing products • Special anodizing applications • General engineering and fabrication  • Others

 

6. Aluminium sheets and plates for its most common application:

 

Aluminum sheet(plate) for air-conditioner,plastic board etc

 

1)Alloy:1050 1060 1061 1070 1100 3003 3004 3105 5005 5052 5083 5754 5A03 5A06 6063 8011 

2)Temper:O-H112,,F,T 

3)Thickness: A:cold rolling: 0.09--8.0mm 

B:hot rolling: 0.2--500mm 

4)Width: A:cold rolling: 200--1900mm 

B:hot rolling: 200--2300mm 

5)Length: A:cold rolling: 500--10000mm 

B:hot rolling: 500--10000mm

 

1. Aluminium sheets other factor introduction:

Aluminium sheet is almost always alloyed, which markedly improves its mechanical properties, especially when tempered. For example, the common aluminium foils and beverage cans are alloys of 92% to 99% aluminium. The main alloying agents are copper, zinc, magnesium, manganese, and silicon (e.g., duralumin) and the levels of these other metals are in the range of a few percent by weight.

 

Common Aluminium sheets show:

Aluminium sheet and Coil/Strip normal atlas offering 

Aluminium Sheet and Coil/Strip
Alloy	1145, 3003, 3004, 3105, 5005, 5052, 5251
Temper	0, H32, H34, H38
Thickness (mm)	0.5mm to 6.0mm for sheet and coil, 0.5 to 3.0 mm for strip
Width (mm)	900, 1200, 1500, 2000, Customer specific width (25mm minimum)
Length (mm)	1800, 2400, 3000, Customer specific length
Finish	Mill, Customer specific finish
Coating	PE Coating (not standard)

 

Normal one steel 3004 h32 Aluminium sheet 

Thickness       mm	Width   mm	Length   mm	Mass           per sheet     kg	Finish
1.0	1219	2489	8.253	Painted Poly Violet Tone White
1.0	1219	2900	9.615
1.0	1219	2489	8.253	Painted Poly Violet Tone White with plastic coating to one side

 

Normal Marine plate 5083 H321, H112

Technical Data
Substrate material	Aluminium plate, stretched hot rolled
Alloy and temper	5083-H321 5083 H112
Coatings and finishes	Mill
Sheet Size
Thickness	3.00 4.00 5.00 6.00
Flat width x length	1200 x 2400
	1200 x 4800
	1200 x 6100
	1530 x 6100
	1830 x 6100
Thickness	8.00 10.00 12.00
Flat width x length	1200 x 2400
Standards Compliance	Refer to DNV Certification Standards before project commencement
Availability	All main centres
Scope of use	Marine hulls and components

 

 

aluminium sheet ,aluminium alloy sheet