hydro Turbine generator Francis 1WM Easy operation Optimum efficiency up to 94% Stable operation up to 50 years 50KW-2MW

Hydro Turbine generator Francis 1WM

1,high efficiency

2,long life

3,environmental friendly

4,widely used

  

type	SFW-300-6/740
power	300-1200KW
efficiency	50HZ 60HZ
class of insulation	F
power factor	0.8

 Production in factory

 The design and application water turbine generator as follows

Turbine selection is based mostly on the available water head, and less so on the available flow rate. In general, impulse turbines are used for high head sites, and reaction turbines are used for low head sites. Kaplan turbines with adjustable blade pitch are well-adapted to wide ranges of flow or head conditions, since their peak efficiency can be achieved over a wide range of flow conditions.

Small turbines (mostly under 10 MW) may have horizontal shafts, and even fairly large bulb-type turbines up to 100 MW or so may be horizontal. Very large Francis and Kaplan machines usually have vertical shafts because this makes best use of the available head, and makes installation of a generator more economical. Pelton wheels may be either vertical or horizontal shaft machines because the size of the machine is so much less than the available head. Some impulse turbines use multiple water jets per runner to increase specific speed and balance shaft thrust.