pure caustic soda on sale in 2013 A Style: flake and pearl B Purity: 99% min. C 50% only for flake

Pure Caustic Soda on Sale in 2013

Introduction

Sodium hydroxide, also known as lye or caustic soda, has the molecular formula NaOH and is a highly caustic metallic base. It is a white solid available in pellets, flakes, granules, and as a 50% saturated solution.[citation needed]

Sodium hydroxide is soluble in water, ethanol and methanol. This alkali is deliquescent and readily absorbs moisture and carbon dioxide in air.

Sodium hydroxide is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Worldwide production in 2004 was approximately 60 million tonnes, while demand was 51 million tonnes. Although molten sodium hydroxide possesses properties similar to those of the other forms, its high temperature comparatively limits its applications.

Specificaiton

Usage

Sodium hydroxide is the principal strong base used in the chemical industry. In bulk it is most often handled as an aqueous solution, since solutions are cheaper and easier to handle. Sodium hydroxide, a strong base, is responsible for most of these applications. Another strong base such as potassium hydroxide is likely to yield positive results as well.56% of sodium hydroxide produced is used by the chemical industry, with 25% of the same total used by the paper industry. Sodium hydroxide is also used for the manufacture of sodium salts and detergents, for pH regulation, and for organic synthesis. It is used in the Bayer process of aluminium production.Sodium hydroxide is used in many scenarios where it is desirable to increase the alkalinity of a mixture, or to neutralize acids.For example, sodium hydroxide is used as an additive in drilling mud to increase alkalinity in bentonite mud systems, to increase the mud viscosity, and to neutralise any acid gas (such as hydrogen sulfide and carbon dioxide) which may be encountered in the geological formation as drilling progresses.In the same industry, poor quality crude oil can be treated with sodium hydroxide to remove sulfurous impurities in a process known as caustic washing. As above, sodium hydroxide reacts with weak acids such as hydrogen sulfide and mercaptans to give the non-volatile sodium salts which can be removed. The waste which is formed is toxic and difficult to deal with, and the process is banned in many countries because of this. In 2006, Trafigura used the process and then dumped the waste in Africa

pure caustic soda on sale in 2013