FIXING AGENT JL-TA-A-D is built compourd of organic alkali inorganic alkali and chelating agent

Brief introduction

FIXING AGENT JL-TA-A-D  is built compourd of organic alkali inorganic alkali and chelating agent .Acorrding to the different resistant-alkali,1/7 or 1/8.5 replace pure alkali as fixative alkali active dyeing traditional process ,because the competeivly buffer action and work liquid PH value stabilizer ability ofthis product,high vate of fixation color,after dyeing and fixing,the fabric turn colored light pure and full,recur and level character pefect,easier to chearout,it is suitable for intermission style machine, is the newest product of energy conservation and cost reduce inside and outside .

Technology properties

Components: Built compound of organic alkali ,inorganic alkali and chelating  agent.

Appearance: White powder

Solubility: diffluence under normal temperature,and better at 40-50°C.

PH (1% water-soluble fluid): 9

Characteristics and capabilities

1.profect chelate dispersing capability,easy diffluence without precipitation, Disperses evenly in the dye liquor,Avoids producing the adding bad  effect in the dyeing.

2.easy to wash,especially in medium and deep color dyeing,under equal process ,without blaze cause to pure alkali wash incompletely.provide the better drying and wetting rubbing fastness than pure alkali.

3.it is suitable for all kinds of intermission style machine,no colored limited .

4.special for Green jade blue, light yellow, colorful blue, colorful green the dosage is 1/8.5,high vate of colored, recur and level character pefect.

5.as usual process, the dosage is pure alkali 1/7-1/10,the details as following table(table1.table2)

6.this product JL-TA-A-D, a little dosage, convenience to use,capability is stabilized,lightens labor intensity of operators greatly and reduce the space of warehouse.

Important note

1. This product is the new product which develops in the substitution alkali 1:4 foundation.

coloured light more pure,the amount used are less, more economical.

2. guide measure is only 1/7-1/10 to pure alkali, Because various printing factory use dye kali resistivity is different, In the use process has the individual color and the original soda ash craft has the difference is normal, adjust the dyeing craft formula slightly, Because the substitution alkali dyed the mechanism to partial dye on to carry on the trimming, but these trimming direction is precisely dyes the worker to hope.

3. FIXING POWDER JL-TA-A-D, can be not join the dye vat directly. Needs the clear hydrated material to join at different times, To several special dyes, for example, light yellow, the green jade blue, the colorful orchid, the green dye should follow the few many times principles.

4. This product presently melts presently uses, After operates the bag the remainder to have to wrap up well in order to avoid is affected with damp, influence the effect.

FIXING AGENT JL-TA-A-D