Ads by Google
alcometers for iphone breathalyzer , alcohol tester for iphone alcometer
Specifications:* Backlight: Semiconductor alcohol sensor* Green light: Safety < 0.02% BAC* Orange light: Caution 0.02 - 0.05% BAC * Red light: Danger ≥0.05% BAC* Accuracy: -0.01-+0.03% at 0.050%BAC * Warm-up time: <10s; Respond time: < 5* Test Range: 0.000% - 0.190% BAC* Measuring units select: %BAC, mg/* Testing Accuracy: At 0.05%Bac, -0.01 / +0.03% Bac
How to use?
1) Plug the unit into the bottom of your Phone. 2) When Phone screen activated, press the power switch for 2 seconds, the tester will show “wait” and “0” alternately. 3) The tester will then show “Blow" and count down from 10. Please close to the blowing vent and blow for 4 seconds, after finishing countdown, display screen will show the test result. 4) There are different results on the showing 5) You can adjust the unit from %Bac to mg/l Brae by pressing the power switch. 6)The result will be displayed for about 15 seconds. Then, the word “OFF” will be blinking for 2 seconds. The tester will be turned off automatically by itself Testing Accuracy: At 0.05%Bac, -0.01 / +0.03% Bac.
Precaution:* The measurement of this device should only be used as a guide. The reading is not legally binding and cannot be used in a court of law. The manufacturer does not take any legal responsibility.* Always wait at least 20mins after drinking, smoking or eating before taking a test.* For accurate results, wait at least 3mins before repeating a test.* Do not use any chemicals / alcohol etc to clean unit.