Alarm System with Kepayd and display 90 wireless zones 6 wired zones support more sirens 6 group phone numbers CE

Complete Wireless Alarm System built in Keypad and display  

Simple Description

A burglar alarm system is a valuable prevention tool that can help give you a peace of mind in terms of protecting your home and your family from the threat of home invasions and other problems such as fire, burglary / theft and similar other incidents. they can alarm the homeowners before some mishap occurs.

Main Features

Alarm Control Panel is compatible with 1527 learning code sensors and 2262 fixed code sensors both.Defense Zone number auto-display to know which defense zone was triggered.6 LED status indicators: Power, Away, Home, Alarm, Set, Cut.90 wireless defense zones (01-90) and 6 wired defense zones (Line1-Line 6).Every defense zone can be set up independently (Instant zone type, Home zone type, Delay zone type, Emergency zone type, Anti-attack zone type).Support multiple sirens and 100 pcs wireless detectors in total.One-key touch Home Arm / Away Arm / Disarm / panic with keypad on the control panel.One-key touch Home Arm / Away Arm / Disarm / panic(SOS) via remote controller.6 groups of user phone numbers to dial out.1 group of monitoring centers (optional).Record 10-second voice message to be played out in case of alarms.Arm / Disarm / Listen-in by calling the control panel internal phone number.Cut alarm if telephone line is cut.Built-in backup battery in case of electricity power off.

Technical Parameters

Main Panel

Power Supply: DC: 12V

Backup Battery: Ni-MH rechargeable battery

Working Current: ≤50mA

Alarm Current: ≤300mA

Wireless Reception Frequency: 433MHZ ±0.5MHz

Wireless Reception Sensitivity: - 108db

Temperature: -25 °C ~ +45°C

Relative Humidity ≤90%

 

Wireless Door / Window Detector

Power Supply: DC12V (built-in 12V battery)

Static Current: ≤20uA

Transmission Current: ≤15mA

Transmission Distance: No obstacle 80m

Alarm Distance: 15mm

Temperature -25°C ~ +45°C

Humidity ≤ 90%

 

Wireless PIR Detector

Power Supply: DC9V (built-in 9V battery)

Static Current: ≤100uA

Transmission Current: ≤20mA

Transmission Frequency: 433MHz ±0.5MHz

Transmission Distance: No obstacle 80m

Detection Speed: 0.3~3m/s

Detection Distance: 5~12m

Detection Range: Horizontal 110° Vertical 60°

Temperature -25°C ~ +45°C

Humidity ≤ 90%

 

Remote Controller

Power Supply: DC 12V (built-in 12V battery)

Static Current: 0

Transmission Current: 15mA

Transmission Frequency: 433MHz ±0.5MHz

Transmission Distance: No obstacle 80m

Temperature -25°C ~ +45°C

Relative Humidity ≤90%

 

Standard kit we offer

Alarm Control panel x1

Wireless Passive IR motion sensor x1

Wireless Door/Window magnetic sensor x1

Wire Mini Siren x1

Wireless Remote Controllers x2

Adapter x1

Extra telephone line x1

English Manual x1

 

Care and Maintenance

The following suggestions are required to maintain your obligations under the warranty terms, and for prolonging the service life of the system.

Place the control panel and all parts and accessories out of children’s reach.

 

Keep the alarm system dry, rain, humidity and various fluids or moisture all will corrupt the electronic circuit.

 

Do not use or place the alarm system in dirty locations, otherwise the electronic elements will be damaged

 

Do not place the system in excessively hot lcoations. High temperature will shortten the service life of electronic equipment, damage batteries, deform or even met some plastic parts

 

Do not place the system in excessively cold locations. Otherwise condensation many occur and damage the circuit board of the alarm system

 

 It is recommended that you check and test the alarm system periodically

 

Check the main panel every three months:

whether it can arm/disarm normallywhether it can dail the number for alarm normallywhether it can receive wireless detectors’ signal normallywhether the back-up battery can work normally

Check the wireless detectors once a month

trigger wireless detectors to see if system can alarm normallycheck all detectors’ batteries to see if it’s in low voltagecheck whether wireless detectors can send signal to the main panel normally

Since the alarm system is continuously in operation or stanby mode, the supply adapter of the control panel shall be connected to a safe and reliable socket.

 

Do not place the system near your bedroom or office table, because the siren will make high-loudness sound in the case of alarm, which may adversely affect your rest or work.

 

If the alarm system will not be used for a long time, please disconnect the system from the power supply.

 

Please do not disassemble, repair and alert the products without permission, or it may cause accidents and faults.

 

Without approval and consent of relevant authorities, please do not set “110”, “119” or the alarm phone number of police station for this main panel.

Complete Wireless Alarm System built in Keypad and display