Ads by Google
ATEX diffusion type h2s gas detector for toxic gas
This Toxic gas detector with LED display and Remote control is our best detector. It can work alone,and also can network with gas monitoring system. Our gas monitors which can network this model are JB-TB-AT2020DH and JB-TB-AT2020FH.
Feature:1.LCD display ,can display real-time gas concentration.
2.With Fault and Alarm indicators.
3.With Remote Control. You can calibrate the detector without opening cover.
4.Adopts imported sensor with high measurement accuracy, high stability, strong anti-poisoning and anti-interference ability.
5.Automatic recognition and protection the concentration of sensors , short-circuit and open-circuit of sensors, and automatic fault detection .
6.Explosion-proof design, it is suitable for II gas environment
7.Adopts HBUS four buses communication mode ,power wire and signal wire both use non-polarity design.And with automatic protection function to avoid damage to hardware caused by short -circuits in the use
8.Built-in passive switching output. Not only can achieve the connection with Sound and Light Alarm, but also
achieve site control.
9.Double G 3/4" joint design, not only achieve the interconnection of bus system, but also can connect Sound and Light Alarm.
10.Intelligent sensor, replace sensor without demarcating.
11.Pipe-mounted and wall-mounted optional.
Technical:| Model No. | XP3000/L | Power consumption | ≤1.5W(DC24V) |
| Detection principle | Catalytic / Electrochemical /Infrared/PID | Working voltage | DC14V~35V( detector terminal) |
| Communication mode | HBUS | Contact rating | 2A/DC24V |
| Install screw thread | G 3/4” internal thread | Dimension | 168mm×100mm×175mm |
| Weight | 1.10 kg | Body material | Aluminium |
| Explosion-proof sign | ExdIICT6 | Protection class | IP65 |
| Display mode | LCD | Alarm relay | Normally open |
| Gas Sample mode | Natural diffusion | Detection Gas | Combustible gas, VOC (Certain Organic Vapors),H2(ppm),CO,H2S,O2(VOL),NH3(ppm), Cl2,NO, CO2 |
| Working condition | temperature:-40°C~+70°C(Catalytic); -20°C~+50°C(Electrochemical),-20°C~+55°C(PID),-40°C~+70°C(Infrared) humidity:10%~93%RH(incondensable); pressure range:86~106kPa |
ATEX diffusion h2s gas detector for toxic gas