Ads by Google
roducts Descriptions:
Rtriv’r is an anti-lost alarm working for Android smart phone. It communicates with your phone by Bluetooth connection, and easily attaches to your keys, purse, bag, or any other item you want to protect from loss. Rtriv’r App supports Android2.1 or above.
l 2 way finder. Tap the button on the Rtriv’r to ring and vibrate your phone. If you are looking for your Rtriv’r, use the phone’s application to make the Rtriv’r ring. They can find each other in a 30-foot radius(within 8~10 meters).
l 2 way alarm between your smart phone and Rtriv’r. If one goes out of range, you can be notified by both phone and Rtriv’r, even if you are calling or your phone had been set in a silent mode.
Rtriv’r overview
Specification
Dimension | 57mm×38mm×11mm |
Weight | 21g |
Valid distance | 10~15m (outdoor) |
5~10m (indoor) | |
Battery capacity | 400mAh (lithium-polymer battery) |
Standby time | 600 hours ( search mode) |
Constant working time | 80 hours ( alarm mode) |
Charge time | 2 hours |
Charge voltage | 5V DC |
Turning Rtriv’r on and off
l A 3-second click on button will turn it on, with the notification of LED flashing blue twice slowly.
l Press and hold down button for 10 seconds to turn it off. The LED will flashing red and blue alternately.
l To reset Rtriv’r, press the button and hold down for 15 seconds. The LED will flash red and blue at the same time.
* Rtriv’r will standby after disconnected with smart phone. There is very low power consumption. And the Rtriv’r can also be found by your phone in this status.
Rtriv’r App
Before using you Rtriv’r device, please download and install Rtriv’r application on your phone. You can download app by searching for rtrivr in Google Play Store or download from website as below.
http://3g.rtrivr.com/en/down.asp
Pairing Rtriv’r with a phone
You need to pair Rtriv’r with your phone after installing application on the phone.
1 Turn on the Bluetooth, and search for devices
2 Tap Rtrivr in the list that appears.
3 Enter a password “0000” to finish pairing.
4 Select the paired device.
*Make sure the Rtriv’r device is turned on and LED is flashing blue twice slowly. Pairing will fail if LED is flashing twice fast, for Rtriv’r is searching automatically for the last connected phone.
Find Rtriv’r
Tap Search for Rtrivr on the phone, it will find and ring the Rtriv’r automatically.
Find phone
Press and hold down button 3 seconds to turn Rtriv’r device on. Tapping the button again, it will ring and vibrate the phone.
Anti lost alarm in real time
1 Tap search for Rtrivr. There will be the text of “Connected” showing on the screen.
2 When the distance between Rtirv’r and phone goes out of range, both of them will trigger alarm immediately.
3 Eliminate the alarm by pressing the phone and button on Rtriv’r.
Other settings
You can customize your settings in the App, including renaming the Rtriv’r, resetting the password, and selecting the alarm mode, etc.
Exit App
Tap Exit app and the Rtriv’r device cannot find the phone.
Color: Black, White
What's in the package:
1*pcs anti-lost alarm, 1*pcs USB charging cable, 1*pcs manaul(Accessory only; not including device)
2012 New bluetooth sensor alarm for android smart phones