30kw screw air compressor 1.FAD:5.8m3/min 2. pressure:10bar 3.Motor:30KW 4.Cooling:air

30kw screw air compressor

Fully automatic load and unload. Compressor will start automatically and shut down under the following conditions:

-          When the target pressure in the air tank has been reached

-          When the voltage drops below a thrashold

-          In an over-pressure condition

-          When the temperature reaches a protection setpoint

High-quality European technology and components (GHH-Rand and SKF)

M-H air filter with long-life capability.(4000 hours+), easy for maintenance and replacement.

M-H oil filter, filtration density 10 micron (99.9% efficiency) and long-life capability (4000 hours+).

M-H air-oil separator, particle count below 3 ppm

Control system: All parts are by Schneider in France

Specification of screw air compressor:

Model	Capacity/pressure M3/min/Mpa	Compre ssing stage	Tem of delivery	Power (V/ph/Hz)	Motor (kw)	Start method	Dia. of hole	Drive
KVB-25A	3.22/0.7	One Stage	Air cooling: <surroun dings +15°C	380/3/50	18.5		G1.25”	Belt drive
	3.01/0.8						G1.25”
	2.52/1.0						G1.25”
	2.3/1.2						G1.25”
KVB-30A	3.6/0.7				22		G1.25”
	3.56/0.8						G1.25”
	3.07/1.0						G1.25”
	2.84/1.2						G1.25”
KVB-60A	7.36/0.7				45		G1.5”
	7.1/0.8						G1.5”
	6.47/1.0						G1.5”
	5.8/1.2						G1.5”
KVB-75A	10.83/0.7				55		G2”
	9.2/0.8						G2”
	8.61/1.0						G2”
	7.71/1.2						G2”
KVB-100A	14.11/0.7				75		G2”
	13.02/0.8						G2”
	12.04/1.0						G2”
	10.06/1.2						G2”