PU foam adhesive Used for injection HEPA filter Capacity:10Tons per day Delivery time: 10-15days after your deposit

SLGX150

High quality PU system for HEPA filters, easy operation, use by PU casting machine to injection filter end cap or by hand.

Technical parameters:

Item	Component A	Component B
Appearance	cream viscous liquid (original color)	light brown liquid
Density 20°C g/ml	1.10±0.02	1.20±0.03
Viscosity 25°C mPa.S	1200±300	55±10
Storage	6 months at room temperature ≤25°C
Mixing ratio by weight	100	50
Dry time	2hours
Curing time	10-24hours
Shore A hardness	70±5
Tensile strength	≥0.6 MPa
Color	White

Instructions:

1. Material-A should be stirred or shaked when you injected it into the machine.

2. Material-A and material-B are mixed at the mixture ratio of 100:50 and the best work temperature is 28°C

3. The material’s temperature should be controlled 24°C-28°C then you can start operation

PU sealant for HEPA filter