Konfix 803 is a non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications.

Konfix 803 isa non-toxic, solvent-free silicone sealant for use in aquarium construction andglazing applications. It's a high-quality acetic curing system based siliconesealant featuring excellent adhesion to glass and many other non-poroussurfaces.

Properties

%100 siliconeVery good bond and physical strengthRapid curingNon-toxic to fishOne component, cures with atmospheric moistureKeep its elasticity at low and high temperaturesDoes not crack, discolour or shrinkResistant to many chemicalsResistant to UV radiation

Applications

Bonding, sealing and repairing of aquariumsConstruction of glass structures, silos and containersGeneral glazing and glass worksGlazing on aluminium frames and shop displaysSealing of windowsUniversal building and construction jointsSealing of ventilation,heating and air-conditioning systems

Instructions

It is recommended to make the application between +5°C and +40°C. Surfaces must be clean and dry. In order to reduce the deformations of the joints, their depth must be much less than their width, minimum dimensions are 5x5 mm, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a back up material. To ensure straight sealant edges, the areas adjacent to joints must be masked with a masking tape. After the application, the sealant must be tooled with light pressure with in 5 minutes to spread the material against the joint surfaces and to obtain a professional finish. Excess uncured sealant may be cleaned with solvent. Cured sealant can be removed barely mechanically

12 months if stored at room temperature.

Konfix 803 is a non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications. It's a high-