Anaerobic thread locking adhesive Medium strength Controlled lubricity for accurate clamp loads,removable General purpose Introduction

 Darbond® Anaerobic thread locking adhesive 2242 is one component, medium strength, thixotropic viscosity, general purpose anaerobic threadlocker. It cures when confined in the absence of air between two close fitting metal surfaces. Parts can be disassembled by hand tools.

Typical Properties

Medium strength, thixotropic.Controlled lubricity for accurate clamp loads.Easy removal, parts can be separated with hand tools.General purpose, used for locking and sealing threaded fasteners M8-M16.

 Typical Applications

Used for thread locking and sealing for M8-M16 threaded fasteners, providing protection of loosing proof, leakage proof. Prevent thread from rust.

 Detailed Products of Darbond® Anaerobic Threadlockers

Product No.	Typical Use	Max Gap Fill mm	Uncured			Cured			Curing Speed
			Color	ViscosityGB/T2794-1995mPa.s	Specific GravityGB/T13354- 1992g/cm3	Break TorqueGB/T18747.1- 2002N.m	Prevail Torque GB/T18747.1-2002N.m	Temp. Range °C	Fixturemin	Full cureh
2222	M2-M8, removable	0.13	Purple	1200Thixotropic	1.05	6	4	-50-150	10-30	24
2242	M8-M16, removable	0.13	Blue	1700Thixotropic	1.05	12	5	-50-150	10-20	24
2243	M8-M20, light oil contamination	0.13	Blue	2750Thixotropic	1.05	20	7	-50-150	10-30	24
2262	M10-26, removable	0.13	Red	2300Thixotropic	1.1	22	30	-50-150	10-30	24
2270	M25 and larger,permanent	0.13	Green	500	1.1	26	36	-50-150	10-20	24
2271	M16-M26, permanent locking and sealing	0.13	Red	425	1.12	27	30	-50-150	10-20	24
2272	High temperatures resistant to 230°C, under M32	0.25	Red	9500	1.12	22	24	-50-230	20-30	24
2277	M24-M36, permanent locking and sealing	0.25	Red	7000	1.12	30	30	-50-150	20-30	24
2290	Under M12, wicking grade	0.1	Green	12	1.08	10	26	-50-150	5-20	24
2204	Pre-applied, equivalent to 2262, 2271	0.25	Red	13000Thixotropic	1.05	18	30	-50-150	5-12	72

Anaerobic Thread locking Adhesive 2242(Loctite 242 Equivalent)