Ads by Google
*2.5" high temperature voice coil
* Kapton™ former for increased rigidity and thermal protection
* Pressed cones to improve the high frequency response
* Ideal for compact 2-way system
Specifications
General Specifications | ||
Nominal Diameter | 12 | inch |
Rated Impedance | 8 | ohm |
Nominal Power handling1 | 250 | Watts |
Program Power2 | 500 | Watts |
Sensitivity(lw/lm)3 | 96 | dB |
Frequency Range4 | 57~3.1k | Hz |
Minimum Impedance(Zmin) | 6.4 | ohm |
Voice Coil Diameter | 2.5 | inch |
Voice Coil Material | Copper | |
Former Material | Kapton | |
Voice Coil Winding Depth | 16 | mm |
Number of layers | 2 | |
Magnet gap depth | 8 | mm |
Basket | Cast Aluminum | |
Flux Density | 1.1 | T |
Magnet Material | Ceramic | |
Thiele-Small parameters | |||
Resonance frequency | Fs | 57 | Hz |
DC resistance | Re | 5.3 | ohm |
Mechanical factor | Qms | 5.6 | |
Electrical factor | Qes | 0.47 | |
Total factor | Qts | 0.44 | |
Mechanical compliance | Cms | 0.14 | mm/N |
Mechanical resistanceof suspension losses | Rms | 3.55 | mech-ohm |
Effective Moving Mass | Mms | 55 | gr |
Half-space efficiency | Eff | 2.15 | % |
BL Factor | BL | 14.9 | T.m |
Equivalent Cas air load | Vas | 56 | liters |
Effective piston area | Sd | 0.0539 | m2 |
Max.linear excursion5 | Xmax | 6 | mm |
Voice coilinductance | Le1K | 1.06 | mH |
Efficiency Bandwidth Product | EBP | 121 | |
Mounting Information | ||
Overall Diameter | 315.5 | mm |
Bolt Circle Diameter | 295 | mm |
Bolt Hole Diameter | 6.5 | mm |
Baffle Cutout Diameter | 283.5 | mm |
Overall Depth | 128 | mm |
Net Weight | 5 | kg |
Shipping Weight | 6 | kg |
Shipping Box | 335x335x165 | mm |
NOTES
1. AES standard(60~600Hz)2. Program Power is defined as 3 dB greater than the nominal power handling.3. Sensitivity is measured at 1W input on rated impedance at 1m on axis and averaged between 100Hz and 1000Hz.4. Frequency range is defined as the band of frequencies delineated by the lower and upper limits where the output level drops by 10dB below the rated sensitivity.5. The maxinum linear excursion is calculated as: (Hvc-Hg)/2+Hg/4 where Hvc is The voice coil depth and Hg is the gap depth.6. Vb: Net internal volume of box after subtracting the volume of internal objects.Low price 12 inch audio speaker MW12-65/new product for 2013/woofer speaker/outdoor stage speaker