Ads by Google
Long distance ISO 15693 high power RFID HF high power reader
Model:XGS-HR9202T
Size:215mmx135mmx39mm
Weight:1200g
GENERAL DESCRIPTION
XGS-HR9202T HF high power tag reader is designed upon fully self-intellectual property. Based on proprietary efficient anti-collision algorithm, the series features excellent tag read/write operation performance with high identification rate. The series can be widely applied in many RFID application systems such as Logistics, Personnel Identification, Conference Attendance, Access Control, Anti-counterfeit, Jewelry Management, Self-service of Laundry and Industrial Process Control.
Long distance ISO 15693 high power RFID HF high power reader
FEATURES
l Self-intellectual property;
l Support ISO/IEC15693, ISO18000-3 protocol tags;
l RF output power over 4W;
l Advanced anti-collision algorithm, high identification rate, typical tag process speed is over 80 tags/s;
l Support standard 50ohm RFID antenna with effective distance up to 90cm*;
l Antenna open/short circuit tolerant;
l Support Transparent Command operation;
l Support addressable multiple antenna ports;
l Support DPPM/WPPM tag-parsing mode;
l Support reader network;
l Low power dissipation design;
l Provide DLL and Demonstration Software Source code to facilitate further development.
Transparent Command Operation: It is an advanced feature designed to support tag’s future functions and different chip vendors’ customized tag functions.
DPPM/WPPM Tag-parsing Mode: DPPM tag-parsing mode means depth-first parsing pattern and WPPM means breadth-first parsing pattern. They are different methods of decoding multiple tags.
INTERFACE DESCRIPTION
1.Power Supply Socket J1
No. | SYMBOL | COMMENT |
J1-1 | PWR | +11.6~15V |
J1-2 | GND | Ground |
2.SMA Antenna Socket J21, J22
3.Communication Socket J3
Standard DB9 Female Socket to be directly connected to the host.
No. | SYMBOL | COMMENT |
1 | G_IN1 | General TTL level input with internal 20kΩ pull-up resistor to +5V |
2 | TXD(R-) | RS232 serial data output or RS485 R- |
3 | RXD(R+) | RS232 serial data input or RS485 R+ |
4 | G_OUT1 | General TTL level output with drive/sink 0.5mA current (max.) |
5 | GND | Ground |
6 | G_OUT2 | General TTL level output with drive/sink 0.5mA current (max.) |
7 | COMMON | Common contact of built-in relay |
8 | N_C | Normally close contact of built-in relay |
9 | N_O | Normally open contact of built-in relay |
CHARACTERISTICS
l Absolute Maximum Rating
ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC | 16 | V |
G_IN1, G_OUT1, G_OUT2 I/O Voltage | VIO | 7 | V |
Operating Temp. | TOPR | -20 ~ +65 | °C |
Storage Temp. | TSTR | -25 ~ +80 | °C |