Model | FAS5600060-C55 | |
Output | Rated voltage | 56VDC±5% |
Rated current | 0.6A | |
Ripple | ≤560mVp-p (full load) | |
Rated power | 33.6W | |
Start up, rise, hold | Start up time 500ms, rise time 50ms (full load), hold time>5ms(full load) | |
load regulation | 56VDC±3% | |
Transmission speed | 10M/100M; 1000M (optional) | |
Connection method | Data: 1, 2, 3, 6; Power: 4&5(+), 7&8(-) (can be adjusted according requirement) | |
Input | Rated voltage | 100~240VDC @47~63Hz |
Voltage range | 90~264VAC @47~63Hz | |
Max current | 700mA | |
Efficiency | >80% | |
Surge current | < 40A at 230V | |
Leakage current | <0.25mA ( at 264VAC/50Hz ) | |
Protection | Withstand voltage | Input to output 1.5KVAC/3mA ( 1min@50Hz ) |
Lighting voltage | Withstand 2KV line to line, 4KV line to ground. | |
Insulation resistance | Put 500Vdcvoltage on input and output terminal for 1 minute, test resistance>7MΩ | |
Over load | Enter into hiccup mode when load reach 115~200% of full load, recover after remove. | |
Environment | Work temperature, humidity | -10°C ~ +40°C,10% ~ 90%RH without Condensation |
Storage | -20°C ~ +65°C,0% ~ 93%RH without Condensation | |
Vibration | amplitude 0.35mm, vibrate 10 circles in direction of X,Y,Z, frequency 10-55Hz | |
Safety | Standard | UL60950,EN60950-1,EN61000,ANSI C63.4 |
EMC | Standard | EN55022 Class B,EN55024,EN61000-3-2,EN61000-3-3 |
Other | MTBF | Continually work 8 hours per day, life>50,000 hours |
Burn in | At temperature 40±5°C, humidity 0%~93%, 100Vac~240Vac/50Hz, load:80%~100% / 2 hours | |
Weight | 172g±15g | |
Packing | PE bag + hollow plate + carton box | |
Note | 1. All parameters NOT specially mentioned are measured at 230VAC input and rated load and 25°C of ambient temperature. 2. Ripple & Noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
Active POE injectors(56V0.6A) used for LCD displays