Ads by Google
Model:CY-386
Features:
01)Menu setting
02)Work by repeater station
03)Auto repeater offset frequency
04)Time-out-timer(TOT)
05)Memory channel/Channel lockout
06)Channel name*Frequency display
07)Scanning/Priority scanning/Scan reset
08)CTCC/DCS
09)DTMF function/Hold/Pause/Lock/Monitor
10)APO(Auto power-off)
11)Beat frequency deviation
12)S-meter signal indicates squelch
13)Squelch holding time settable
14)Prompt tone
15)Busy channel lockout
16)LCD backlight
17)Keypad lock function
18)channel frequency step
19)Tone frequency
20)Output power selective
21)Programmable VFO
22)Power on message
23)Narrow frequency adjustment
24)Controlling knob lock
25)Microphone lock/Mic Programmable menu
26)1750Hz transmit hold
27)Call keypad
28)Size:160*44*155mm
Technical specification:
General
Frequency range (TX) | Market C: 400-430Mhz/ Market C2: 440-480Mhz/ Market C3: 400-470Mhz/ | ||
Frequency range (RX) | Market C: 400-430Mhz/Market C2: 440-480Mhz/ Market C3: 400-470Mhz/ | ||
Current | Transmitting <12A/Receiving <1.0A (Output 2W) | ||
Modulation mode | F3E(FM) | Frequency stability | ≤±2.5ppm |
Rated voltage | 13.8V | Weight | 1102g |
Antenna impedance | 50Ω | Dimension | 160*44*155mm |
Transmitter
Output power | VHF:60W(H)25W(L) | Modulation limit | 25Khz±5KH,12.5KHz±2.5KH |
UHF:40W(H)25W(L) | Modulation distortion | ≤5% | |
Modulation frequency | 300Hz-3KHz | Modulation character | 3dB-3dB |
Adjacent channel power | 25Khz≥65dB, 12.5KHz≥60dB | ||
Stray radio frequency measure | -60dB | ||
Receiver
Audio power | 0.3W | Sensitivity | 49MHz/450KHz |
Blocking | ≥90dB | 25KHz<0.2UV,12.5KHz<0.25UV | |
Circuitry | Adopt quadratic frequency conversion | ||
Mid-frequency (1st/2nd ) | Super heterodyne | ||
Selectivity | -6dB 25KHz<12KHz, 12.5KHz<10KHz | ||
-6dB 25KHz<30KHz, 12.5KHz<24KHz | |||
Audio response | 1dB~-3dB (modulation frequency: 300HZ-3KHz) | ||
Audio distortion | <5%(>2W) (microphone internal resistance is 8Ω) | ||
Standard accessories
DC power cable | Programmable cable | Standard speaker or DTMF speaker |