Features
Input from preamplified sensor
Selectable scales of 0/4.000, 0/40.00, 0/400.0, 0/4000 NTU 0/10.00 0/100.0 0/1,000 0/10,000 mg/l of SiO2
Check signal of dirty lens
Alarm of Min/Max turbidity, set point timing, dirty lens, empty cell, too high external light
Dual filter software
Various output options
Application
Drinking water
Water treatment
Bottling industry
Specifications
Turbidity | Measuring range | 0/4.000, 0/40.00, 0/400.0, 0/4000 9/999~99/9999 ppm or mg/l of SiO2 |
Accuracy | ±5% of reading on 0/400 NTU ±10% of reading on 400/4,000 NTU | |
Response time | 10 sec.for 98% of input | |
Resolution | 0.05% of scale | |
Output | Analog output:0~20 mA, 4~20Ma Digital output:Serial Interface RS-232, RF | |
Calibration | 1 point calibration using standard solution Zero of the Probe:0.0~10.0 F.S. Cell Sensitivity:80.0~120.0% | |
Operating Condition | Temperature:0~50°C Humidity:95% (without condensation) | |
Case | Size:96×96×155mm (H×W×D) Weight:0.85Kg Installation:Panel Mounting | |
Power | AC 90~250 Free Voltage, 50~60 Hz (Option:DC 24V) |
Wastewater treatment and Sludge concentration controller/turbidity probe/MLSS sensor