Ads by Google
UV LED area light source curing systemDominant Wavelength: 405nmWork Current: 1000 - 4000mAPower: 540W
8-40 times loner serving life
No Thermal Radiation
Ultra High Illumination
4-20 times energy saving
Ultra Single 60W Power UV LED applied, total 1080w high power outputUnlike traditional UV lamps, which limits on heat sensitive materials and an external fan system is needed. This area light source offers industrial strength curing with a large illumination area for high process throughput, while ensuring uniform intensity from the center to the edge and enables printing on almost all kinds of substrates even on thin film, thin plastics, foam plastic (ceiling tile), paper, and leather.Unique Features and Benefits:1, Extra-long guaranteed life: 20000+ hours , provides lower cost of ownership2, Rapid Cure - Instant on/off, light instantaneously on with no warm up required3, Narrow UV output spectrum4, One peak wavelength of output power (multiple peaks possible as required by process)5, High intensity, emits no heat- able to cure heat sensitive materials, no fuming of cured material normally caused by excessive radiant power from conventional lamps6, Safe operation - no UVB, no ozone, no bulb break, low voltage, no mercury7, Predictable radiant output power with limited drop off with life8, Uniformly arrayed LED and optimal designed lens groups guarantees uniform and stable irradiation, the intensity change from the center to the edge is no more than 3%.9, Maximum UV intensity up to 4000mW/ cm210, Compact - Easily embedded into automated manufacturing lines and equipment11,Many kinds of circuit technique design (patented). The whole system will not be affected by the damage of one LED module.12, Five working modes: constant current, PWM, step, intelligent optical and manual modes, which are specially designed for eliminating cementing stress of UV adhesivesUV LED area light source illuminationUnique Features and Benefits:Two wavelengths of LED available: 365nm, UVA385-400nmUV intensity: 50mW/cm2, 100mW/cm2, 200mW/cm2 (365nm) 800mW/cm2, 4000mW/cm2 (385-400nm)Emitting window: Available in configurable UV emitting L×W from 20-2000mm×20-2000mmCool method: air cooled( a mini fan installed) or water cooledController System
1080W UV LED area light source curing system