Ads by Google
high quality production line test machine
Function of this device
The device is applied to relays and contactors to test the parameters of contact resistance, absorb and release and consumption among the contacts. And this device is capable of automatically determining and automatically defective products sorting.
Characteristics
1. Key components are taking from international famous brand and adopt high precision tester.
2. Employ Siemens PLC Numerical Control.
3. Easy operation, mainly concentrate on touch screen.
4. Automatic fault alarm and tip the point of failure, automatic sorting products.
Main technical parameters
1) Continuous production efficiency-no less than 2100 per hour
2) Voltage range-AC220V±10%,50Hz
3) Air supply-0.4~0.6MPa
Introduction of the product
AC contactor automatic assembly detection production line is kind of automation system based on PLC control, production line repair and computer network.
Complete the procedure of component assembly, tighten self-tapping screws, twist combination screw, the comprehensive test and automatic labeling.
Nofuel relying on a wealth of design and manufacturing experience not only can customized production equipment with different performance according to the demand of AC contactors manufacturers, also provides customers with industry-leading solutions that enabling customers to have absolute first-class automated production lines.
Technical parameters
Product object
1. A.C. contactor
2. Coil rated A.C. voltage 24V~380V
3. auxiliary contacts NC,NO.
Production pattern --non-mixed flow, volume production
Unit type
Mechanical grinding unit
Open space, overtravel, tripping force, tripping force detection unit
Loop resistance, terminal pressure, synchronicity detection unit
Automatic instantaneous calibration unit
Automatic delay calibration unit
Feature
1. This production line focus to adopt constant current source technology, displacement detection technology, force detection technology, linear motion technology, high speed data acquisition technology
2. Data adopt PLC system and touch screen (panel screen) as the control core for production line in order to make it convenient for operators to set process parameters and at the same time testing data collecting save, analysis, upload, print for each unit.
3. The failure information directly located to the separate execution device, display by the man-machine interface which is convenient for maintenance and reduce reduce troubleshooting time.
4. Computer system in repair unit collect the test information on Internet and display the results on computer screen which can help workers to analysis fault reason occurs to products, improve product repair efficiency ,reduce skills requirements to workers.
5. Computer system in repair unit save the test data of the defective products to provide data basis of improving quality control for clients, the defective products testing record information can remain through data backup.
Picture of this device
Technical parameters
Project | Parameter | ||
Applicable products | AC contactor | Main contact | 3alway open |
auxiliary contact | 1always open or 1always close | ||
Coil voltage | 24VAC – 440VAC | ||
Frequency | 50/60Hz | ||
Coil resistance | 6Ω – 2kΩ | ||
Keeping power consumption | 10VA | ||
Cycle time | 6.5s – 11.5s | ||
Mode of production | Non-mixed flow,Batch production | ||
manual work, semi-automatic, automatic | |||
Accuracy of testing | Overtravel, Open distance, synchronization, Full itinerary detection error | ±0.02mm | |