1.Low price and high reliability 2.105°c output capacitor3.AC input power suitable for the world4.High efficiency and low operation temperature5.Soft-start current can reduce the AC input impact effectively6.With short-circuit and overload protection 7.Compact size, light weight8.100% full-load burning test9.Installed with EMI filter, minimum wave | |
Model Specification | S-120-12 | S-120-15 | S-120-24 | S-120-48 | DC output voltage | 12V | 15V | 24V | 48V | Output voltage error (Note2) | ±1% | ±1% | ±1% | ±1% | Rated output current | 10A | 8A | 5A | 2.5A | Output current range | 0-10A | 0-8A | 0-5A | 0-2.5A | Wave and noise(Note3) | 120mVp-p | 125mVp-p | 150mVp-p | 150mVp-p | Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | Load stability(Note5) | ±1% | ±0.5% | ±0.5% | ±0.5% | DC output power | 120W | 120W | 120W | 120W | Efficiency | 80% | 81% | 83% | 84% | Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% | AC input voltage range | 88~132VAC/ 176~264VAC selected by switch 47~63Hz; 248~370VDC | Input current | 2.6A/115V 1.3A/230V | AC impulse current | Cold-start current 30A/115V 60A/230V | Leakage current | <1mA/240VAC | Overload protection | 105%~150%Type: PULSING HICCUP SHUTDOWN Reset: auto recovery | Over-voltage protection | …… | High-temperature protection | …… | Temperature coefficient | ±0.03% (0~50°c) | Setup rise hold up time | 200ms,50ms,20ms | Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,Each axes | Withstand voltage | Input and output interval: 3KvAC Input and enclosure:1.5KvAC Output and enclosure:0.5KvAC | Isolation resistance | Input and output interval: Input and enclosure,Output and enclosure: 500VDC/100MΩ | Working temperature and humidity | -10°c~+60°c,20%~90%RH | Store temperature and humidity | -20°c~+85°c,10%~95%RH | Overall dimension | 199×98×38mm | Weight | 0.66Kgs | Safety standards | UL1012 TUV 60950(IEC950,UL1950) | EMC standards | CLSPR22(55022),IEC801-2,3,4,IEC555-2 | Note: 1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note:5)3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test: The load is from 0% to 100%,others 60%.6.C3,4,32 must be knocked down. |
|