Color Coated Aluminum Coil 1) Coating finish: PVDF, POLYESTER, ACRYLIC 2 ) Aluminum thickness: 0.024mm-1.20mm 3.) MOQ: 5 tons Color Coated Aluminum CoilColor Coated Aluminum Steel CoilPrepainted Aluminum Coil  It can be used for aluminum composite panel, ceiling, door and windows, electric appliance.

Specification:

1) Coating finish: PVDF, POLYESTER, ACRYLIC2 ) Aluminum thickness: 0.024mm-1.20mm 3 ) Standard width: 1240mmSpecial width: 50mm-1700mm4 ) Coils core diameter: 150mm ,405mm, 505mm, 508mm, 510mm 5 ) Coating thickness: PVDF >=25micron POLYESTER>=18micron 6 ) Gloss:10-90%7 ) Coating hardness (pencil hardness): more than 2H8 ) Coating adhesion: no lower than first grade 9 ) Impact resistance: No cracking and peeling(50kg/cm,ASTMD-2794:1993)10) Flexibility 11) MEK resistance: more than 100 times Product Synopsis:Model No.: A1100, A3003, A3105,A5052,A8011 ETC.Product Origin: ChinaPrice Terms: FOB ,CIF ,CNF.Payment Terms: T/T, L/C at sightSupply Ability: 8000 tonsMinimum Order: 5 tonsPacking: Wooden plate.Delivery Time: 15-20 DaysPaints

EpoxyPolyesterPoly-acrylicPolyamidePolyurethanePVDF

Colours

Any color in the RAL 840 HR color chart or requested and approved colors.

Finish Flat (matte) finishLow gloss finishSemi-high gloss finishHigh gloss finishMetallic or mica finish for composite panelPackaging

Horizontal packagingvertical (eye-to-sky) packaging

Strippable Finish

Provision for strippable film application.

Product Classification:

Color Testing:

 

Our Export Markets: We have already made our presence in the international market and our products are well received and used around the globe. We are exporting our products to various countries including South Africa, UAE, Europe and USA. 

Usage / Application:

Package sample picture:

Quotation Time from Monday to Friday

Guide to Ordering  When placing an order, check the following items according to the intended use. 

1. Specification

2. Size

3. Packaging Mass

Specify the packaging mass in consideration of unloading capacity and working conditions.

Cut Sheets: Normally, 2 tons or more are standard

Coils: Normally, available from 5 tons - 20 tons

Specify the maximum weight (and the minium weight, if necessary)

4. Coil ID/OD

For coils, the inside diameters of 508mm (20 inches) or 610mm (24 inches) are standard. Specify the maximum outside diameter acceptable, if necessary.

5. Surface Finish

6. Reversal Use

Normally, appearance quality is guaranteed for the top side of cut-sheets, and for the outside surface of coils. If the guaranteed side is to be the reverse side of the end product, or if both sides become the face sides of the end products, so specify before hand.

7. Edge Finishing

Specify “slit edge” depending on the conditions of use. Slit edges are recommended especially when the delivered product is used as rolled without further processing, thus requiring edge finishing, or when strict width tolerances are required.

8. Applications

JoinMe Steel exercises thorough quality control over the entire process of manufacturing so as to make ordered products suit the customer’s intended use. When placing an order, therefore, the customer should give the information necessary for quality control, such as intended use and the method of fabrication.

9. Other

Dimensional accuracy, shapes and other requirements are usually within the ranges of JIS. However, assembling accuracy, component accuracy and other conditions may require more rigorous specifications. In such cases, consult us before hand to identify needed specifications.

HAVE AVAILABLE TOTAL YEAR. 

" DO THE BEST STEEL SUPPLIER "