Tubings: OD: 6-219 mm, with wall thickness ranging from 1-35 mm Round bar steel: 1mm to 2000mm Square bar steel: 50- 600mm

DIN 14NiCrMo13-4  1.6657

C 0.11-0.17  Si ≤0.40   Mn 0.30-0.60 P≤0.035 S≤0.035  Cr 0.80-1.10  Mo 0.10-0.25  Ni 3.00-3.50

Specifications:

Round bar steel: 1mm to 2000mm

Square bar steel: 50mm  to  600mm

Plate/flat steel thickness:0.1mm  to  800mm

Width: 10mm to 1500mm

Lenth: We can supply any length based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/bar/donuts/ring/cubes/other shapes

Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forged/hot rolled + annealing/normalizing + tempering/quenching +tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement 

   ttt

1.251 0	100MnCrW4
1.255 0	6CrW2V
102Cr6	T10Cr
105V	T10V
21MnCr5	2CrMn
32CrMoV12-28	3Cr3Mo3V
35CrMo7	3Cr2Mo
38CrCoWV18-17-17	4Cr5W4MoV2Co4
40CrMnNiMo8-6-4	4Cr2NiMnMo
45NiCrMo16	4C2Ni4Mo
50CrMoV13-15	5Cr3Mo1V
50WCrV8	5CrW2SiV
55NiCrMoV7	5CrNi2MoV
60WCrV8	6CrW2SiV
70MnMoCr8	7CrMn2Mo
86CrMoV7	9Cr2MoV
90MnCrV8	9CrMn2V
95MnWCr5	9CrMnWV
A10	SiMn2Ni2Mo2
A12(A2)	Cr5Mo1V
A18	Cr8Mo2SiV
A2	Cr5Mo1V
A3	Cr5Mo1V1
A4	Cr2Mn2Mo1
A5	Cr1Mn2Mo1
A6	7Cr1Mn2Mo1
A7	Cr5W1Mo1V5
A8	5Cr5W1Mo1Si
A8MOD2	5Cr8MoSiV
A9	5Cr5Ni2Mo2SiV1
BCR-01	2CrNiMoV
CC1	9Cr2MoV