1) Overcharge protection 2) Overdischarge protection 3) Ip55 protection 4) Certification: CE, ISO9001

CE 12 volt 10 amp solar charge controller  

Product Description:

Light control+time control ; the selection of sing &two circuit loads is available;12V/24V,automatic identification; nixietube display;operation mode can be set  by buttons, Functions such as solar and accumulator reverse, load and short circuit protection are complete .

Product Features:

1)Prevent overcharge of the accumulator

2)Prevent overdischarge of the accumulator

3)Prevent back charge function

4)Accumulator and solar panel reverse connection protection function

5)LED charge and discharge operation status indication

6)Automatic temperature compensation

7)Automatically switch on the illuminating lamp in the evening according to the light intensity

8)Set of 20 classes of timing mode is available

9)Set of the first half and latter half of the night lighting mode is available

10)Ip55 protection

11)Certification: CE, ISO9001

Model Number	YTC-L-10-12/24
Rated charging current	5A ;10A ;15A ;20A
System voltage	12V/24V Auto
No-load loss	<5mA;
Charging circuit voltage drop	< 0.20V;
Over voltage protection	14.1V;×2/24V;
Direct charging voltage	14.4V;×2/24V  (lasting time:30min)
Charging return voltage	13.2V;×2/24V
Over discharging return voltage	12V;×2/24V
Over discharging voltage	10.8V;×2/24V
Temperature compensation	-3.9mv/°C/2V(Boost charge  Direct charge  Float charge Charge return voltage);
Environmental temperature	-35°C-+65°C;
Output power	12V:0~60W /24V:0~120W
Output voltage	Storage voltage ~ 48V
Typical Efficiency	≥ 92%
Protection	1,Storage battery reverse connect protection, When storage battery reverse connect, controller is not working 2,LED open circuit and short circuit protection.