1.fused and stabilized Zircon sand: 2.Resistance to high temperature, corrosion. 3.High stability. 4.made in shandong

Country of Origin: Australia, Indonesia, South Africa etc

1,Specification

Granularity : 80-140mesh

Grand             Composition	SA8	SA6	SA4	SA2
ZrO2	≥66%	≥65%	≥64%	≥63%
Fe2O3	≤0.08%	≤0.10%	≤0.20%	≤0.25%
TiO2	≤0.10%	≤0.10%	≤0.20%	≤0.30%

2. Introduction

Pure zircon sand is usually colorless and transparent crystal state, Quartet column construction, normally because of the different Country of Origin with the different types and quantity of impurities, resulting in dyed yellow, orange, red, brown and other colors, hardness 7.8, specific gravity 4.6-4.71, 1.93-2.01 refractive index, birefringence, absorb light directly; magnetic susceptibility low, non-conductive; the melting point of 2550 °C. Zircon sand normally symbiotic with ilmenite, rutile, monazite and xenotime in the Coastal sand, then will get zircon sand after the water, electrostatic, and magnetic separation processing. Their theoretical compositions are ZrO2 and SiO2, and a small amount of Fe2O3, CaO, Al2O3, and other impurities, theoretically pure zircon sand containing 67.23% ZrO2 and 32.77% SiO2

 

3,Usage

 

Zircon sand is commonly used in the manufacturing of refractory (Zirconium refractories, such as zirconium corundum brick, zirconium refractory fiber), molding industry, ceramic and enamelware producing, in addition, also used in the production of glass, metal (spongeZr) and zirconium compounds (zirconium dioxide, zirconium oxychloride, zirconium, sodium fluorozirconate, potassium, zirconium sulfate, etc.).

 

2012 HOT SELL zirconium sand with good quality