Welcome to ECOL - Join Free - Sign In
CuNi2Si-- UNS.C64700 / C70250 Copper Nickel Silicon Alloys
CuNi2Si-- UNS.C64700 / C70250 Copper Nickel Silicon Alloys
Supplier Info
[China Supplier]
Contact Person : Ms. Chen Lindy
Tel : 0086-592-5631276
Fax : 0086-592-5750151
Product Detail
C64700 / C70250 Copper Nickel Silicon Alloys, including CuNi2Si copper bars,plates,wires.

CuNi2Si – UNS.C64700/C70250 Nickel Silicon Bronze Alloys, which is an age-hardening alloy, higher alloyed in comparison with CuNi1.5Si, for current-carrying formed parts. It has an a-structure with very fine precipitations and recommends itself both for lead frames which require a high rigidity of the pins and for connector with high demands on the electrical conductivity, strength and relaxation behavior. In addition, the CuNi2Si can also be used for current-carrying formed parts and contact springs due to its good fatigue strength, forming and spring properties.

Typical Application for C64700/C70250 Nickel Silicon Bronze Alloys:

Electrical : Resistance Welding Electrodes, Motor Rotor Bar, And Resistance Welding Tips.Fastener   : Fastener partsIndustrial : Brazing Rod, Welding Rod

Available Sizes:Custom Diameter & Sizes, Random Mill lengths

Available Products (forms):Round bars, Flat bars, Square bars, Rectangular bars, Hexagon barsCustom shapes are available upon request.

Chemical Composition:

Ni: 1.60-2.20%Si: 0.40-0.80%Fe: 0.10% Max.Zn: 0.50% Max.Cu: BalanceNote: Copper plus additions equal 99.50% minimum.

Typical Physical Properties:Specific Gravity: 8.80-8.90 g/cm3Coefficient of Thermal Expansion per °C: 17 x 10-6 /K (20-300°C)Electrical Conductivity (% IACS): 38 (22 Ms/m)Thermal Conductivity (W/mk): 250 Modulus of Elasticity (10 3 MPA): 130

Note: 1). the units are based upon US Customary.2). the typical physical properties apply to age hardened products.

International Specification:

Rods/Bars/Plates/Sheets: UNS.C64700, UNS.C70250, RWMA Class 3

European Standards: CuNi2Si, DIN 2.0855, CW111C to EN

Note: ASTM: American Society for Testing and Materials RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to DIN & RWMA

CuNi2Si-- UNS.C64700 / C70250 Copper Nickel Silicon Alloys

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.