Cheapest Smallest 3G wireless router with wifi RJ451*LAN Port; 1* USB 2.0 host1*Reset,1*micro USB portWireless 802.11n
1.Physical Interfaces:1*Built-in 10/100M Ethernet LAN Port; 1* USB 2.0 host for supporting USB 3G Modem.1*Reset button 1*mini USB port to connected laptop or power adapter for power supply.
2.Main Specification: *Compatible with HSPA/CDMA DVDO USB Modem,the price is not including USB 3G modem cost; *Built-in Ethernet port, making the cable broadband convert to WiFi and hotel and home, also let more people surf the internet under the WiFi coverage area.*Wireless 802.11n standard speed up to 150Mbps,Support over 20 WiFi clients port connection; *Portable design, light and small enough rot you take anywhere.*Supports WEP, WPA-PSK/WPA2-PSK encryptions
*Router function: Support NAT/NATP function,Support DHCP Server/Client,Support virtual server and DMZ function,Support VPN pass-through(IPSec/PPTP) function.
3.Built-in Battery: 1500mah li-ion Battery,can work 4-6 hours Support charging for android tablet,smartphones and other products.
4.Dimension and weight:108mm*65mm*25mm,about 55g.
5.Package Contents:1*3G Wireless Router; 1*Mini USB cable,1*User manual.
a)Setting wi-fi SSID
Click the wireless>wi-fi settings,enter desire wi-fi SSID at network Name(SSID)then click Apply.
b)Forget Wi-Fi password or SSID
Load Factory Default settings by clicking Admin>settings>Load Default Button.Alternatively, user may press the reset button from the button of the device for more than 5seconds,a reboot will be happening.It will no need password for WiFi access.
C) Setting Security Method
Wi-Fi default security method is Disable.Please make sure that the router’s encryption method is same as the device or PC Encryption method if want to configure the security method, click Wireless >Security>Security mode.
Select security,same as the PC or WiFi Device.Please make the number of the passwords in 8-64bits.
2.2 Manual APN
Firstly setting”3G” mode: Internet>WAN Network>WAN Connection Type>3G,then select “Manual APN”>fill in APN information accordingly and press”Apply”
Establish Network Connection
Step1:Open computer’s wireless network connection,set the computer to “automatically obtain IP address” and “automatically obtain DNS server address.”(picture 1&2)
Step2:Make sure you PC have WI-FI status in “ON” condition.When WI-FI connected,click“Refresh network list”,select the router’s wireless network name in the “Wireless Net work Connection” page.(Wi-Fi SSIDdefinition :XXXXX-XX 12345678,Wi-Fi connected and internet access.Then means you can use internet.Please see picture 3&4 )
Note1:if your computer or device doesn’t have Wi-Fi Funcation, Please use RJ45 cable to Connect your Wi-Fi device or PC with 3G Router through LAN port.
Note2:if can’t sure the successfully,then need to go step3.
Step3:Open the web browser and input address 192.168.169.1.Press enter(picture 5)
Input password “admin”,if you want to change password#1.
4 Hardware Installation,Pleasde make sure the M1 power switch in “R”
4.1. Connet via 3G USB Modem
Before you begin,Please make sure you have below items prepared
1. M1 Router
2. 3G Modem(compartible#2 with M1 Router
3. 3G SIM Card(with data plan and valid log in credential ready
Hardware installation steps
Step 1 insert the 3G SIM Card into USB Modem
Step 2 insert the 3G USB Modem to the M1 usb port
Step 3 Supply power to M1
Step 4 Make the computer connect the WI-FI SSID of M1(see 4 computer setting)
Step 5 then you could surf
If you could not surf, Pls do following operations
Step 1 Open a browser and enter http://192.168.169.1 at address bar
Step 2 Enter login credential with password as “admin”
Step 3 Click internet>WAN Network Make sure that the 3G mode is being selected in WAN Connection Type>Select Auto Apn> Apply#3
4.2 Connect via ADSL Modem
Before you begin please make sure you have below items prepared
2.ADSL Modem with telephone line connect at RJ11
RJ45 Cable (use existing RJ45 cable from modem)
Step1 Connet LAN port of ADSL Modem and WAN/LANport of M1 Router by R145 cable
Step2 Turn on the power of ADSL Modem and supply power to M1
Step3 Make the computer connect the WI-Fi SSID of AIS (see 4. Computer setting)
Step 4 Open a browser,login with password “admin”,then input relevant ADSL login credential (ID and password ) in the pop up menu
Step 5.then you could surf