1. GSM Remote Control Relay 2. 2 channel outputs 3. Quad Band 4. Max 230V 10A relay output stand

2Channel Output GSM-AUTO Remote Control Relay Output Contacts Switch Box Quad Band

This is a wireless gsm remote control switch that connects to the GSM cell phone network!

This is a wireless remote On/Off switch that can be controlled through a connection to the GSM cell phone network. The connection to the GSM cell network is accomplished by purchasing a SIM card and Pay-As-You-Go (PAYG) plan from your local wireless provider. Once the SIM card is installed in the SIM card holder on the top of the GSM module of your GSM-AUTO will have its own unique telephone number. The unit is activated by an incoming call to its cell phone number. The unit cannot answer a voice call but in sensing the call its logic will activate one or both of the output relays in a pre-programmed sequence. Because the unit doesn’t answer the call, the activation of the relays does not incur any call charges to the PAYG plan or to the caller.Alternately, the individual relays can be activated by sending SMS text messages to the unit’s phone number. Similarly, the unit is programmed by sending specific SMS text commands. HOW IT WORKS

This unit controls 2 independent switches. You can therefore control 2 separate devices from one unit. An example would be in a aircraft hangar where the battery charger and engine pre-heater are turned on in sequence to prepare an aircraft for a flight.

 ADVANCED FEATURES:

Quad band - will work anywhere in the worldSecure caller ID allows controlled access of up to 99 authorized users, the users telephone numbers are added to the white list, only the numbers in the white list are able to activate the GSM-AUTO, users can be added and deleted as required using text messagesThere are no call costs incurred when calling the unit, it will recognise an authorized telephone number calling it and reject the call without answeringThe has two independent relays with normally open and normally closed contacts, these can be programmed to switch on for between 1 second and 18 hours, in addition a delay time between relay 1 and 2 switching can be set, programming is achieved by sending text messages to the GSM-AUTO, once programmed you simply call the unit to activate the relay operations already programmed The programmed operation can be temporarily overridden and the relays switched on for up to 18 hours by sending the unit a text message command, a confirmation text will be returned when the relay(s) is switched on and another when it is switched offThe relays can be permanently switched on or off by sending a text message, again a confirmation text will be returnedAn on board clock and 24 hour timer with 8 time segments for each relay enables the relays to be switched on and off for a set time, for example relay1 switches on at 0600 (6am) and off at 1900 (7pm), once set the timer function repeats every day until reset. The caller ID and override functions are disabled when the 24 hour timer is active.

Specification

Power Supply: AC/DC 9~24VPower Consumption: Max 500mA, typically 50mARelay Contact: 2 x 230V @30Amp, Normally open and Normally Closed contacts(Form C), switching capacity 2.5KwGSM Bands: GSM 850/900/1800/1900MhzOperating Temperature: -20Degree ~60DegreePhysical size: 130 x 100 x 50mm, 5 x 4 x 2inchesProtection: IP65  

CONNECTOR DESCRIPTION

PACKAGE:* 1 x 2CH GSM remote control relay panel(GSM 850/900/1800/1900MHz Quad Bands,Worldwide usage!)* 1 x RS232 PC programming datacable* 1 x Internal GSM antenna  

GALLERY

 

GSM Home Automation SMS Remote Control Relay Output Contacts Switch Box 850/900/1800/1900Mhz,2Channel Outputs, waterproof