Ads by Google
Car Power Bank
Product Description:
High capacity of 13800mAh and high power polymer battery is adopted for fast charging and discharging.it can support the emergency start and
entirely replace the including battery for startup,with guaranteed ability to function normally at -20centigrade.It supports general cellular phone charging and completely replaces the products similar to mobile power packs;with true powerful flashlight,three-
function switchover,emergency rescue,signaling,lighting,deterrence and defense and other powerful features,it is the ideal choice for night shift workers and overtime workers.Five levels of power display indicates battery status real-time,reminding timely recharging.Automatic shutdown under no-load condition protects the device,and over-current protects the device from overload,making it more convenient,safer and more energy-efficient.
Instructions:
1.Charge a cellular phone
a.Select a suitable adapter from the kit,and plug to one end of the converter cable,then insert the USB plug to the output socket of the portable power pack.
b.Press the charge switch in the middle of the portable power pack to start charging,and the five lights on the products turn on,indcating the current battery power of the portable power pack.
c.When the cellular phone is fully charged and one minute after the cellular phone is unplugged,the device will stop power and turn off power display,then return to standby mode.
d.Most mobile phones have a reminder function to indicate full battery,if a mobile phone gas no such function,the device will turn off charging and automatically enter the standby mode.
2.Flashlight
Press the flashlight switch on the side of the device any time to switch on the LED flashlight.Press once to turn on bright LED light,press again to change to flashing mode,press again
to change to flash SOS rescue signal and press one more time to turn off the light.With presses,the cycle repeats.
3.12v for vehicle startup Check the device s power display before starting a vehicle,the vehicle can be started if the power level indicator is more than two lights.
a.Open engine hood of the vehicle to find the vehicle's battery positive and negative electrodes.
b.Clamp the device's red+and black- clamps for heavy current to the positive and negative electrodes of the vehicle's battery,red clamp for the positive electrodes,black clamp for the negative electrode.The clamps must be connected securely with good contact.
c.Insert the other end of the clamp wire into the heavy current startup socket.
d.Check the connection throughly,if there is no short circuit or wrong connection,you can start the vehicle following normal startup operations.
e.You can also disconnect the vehicle's battery wires and replace with the device to solely start the vehicle (replace of the vehicle's battery for long-term use is not recommended)
f.Loosen and remove the clamp wire immediately after starting the vehicle.Do not connect the device with vehicle for a long time during startup,in order to avoid longtime abnormal reverse charging.
Important waring:After the start the vehicle successfully,you should be dismantle the clip connection in (10)seconds as soon as possible.In the vehicle start state,it is strictly prohibited to
connect the product to the vehicle for a long time,or prevent the product cause damage for long time anomaly reverse filling.
4.Portable power pack recharging
5.When battery display i light or 5 lights that together swiftly,it means that the device needs to be recharged.Please recharge it promptly for further use.Recharge as follows:
a.Plug the devices supplied power adater into the 12VINPUT socket,then recharge through commercial power supply.
b.Connect the devices socket for supplied cigarette lighter cable to the vehicles cigarette light to recharge the device.
c.After recharging starts,the five power indicators on the device will flash and display the current charging state.Recharging is completed when the five power indicators stop flashing.
Then the charging adapter or the cigarette lighter cable can ba unplugged to stop recharging.
Specifications:
Size:160*75*28mmWeight:1.15kgBattery capacity:12000mAhOutput:5V12A;12V2A;19V3.5AInput:12V1AFull charging time:3 hoursStarting current:200APeak current:400AOperating temperature:0 centigrade--60 centigrede
Smallest and lightest portable power bank with Jump starter 500g13800mAh high capacity and high power battery, support 12V vehicle jump start and charge for various cellphones, PSP,MP3/MP4,PDA, Notebook, Car refrigerator7 times at least for full charging iPhone4 mobile phoneTakes approx 1 hour a full charge of mobile phoneTakes 2-3 hours to full charge NotebookApprox 20 times with a full charge to start the vehiclePower battery of this applicance will remain 3~6 months, however, we suggest you recharge it every 3 months.
Parts list of vehicle portable power products
1.One portable power pack
2.One power adapter
3.One vehicle cigarette ligter cable
4.One mobile phone converter cable
5.Eight mobile phone adapter plugs
6.One set of startup clamp wire
Product Picture Show:
( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v2/767747426_1/2013_Power_bank_high_quality_portable_power.jpg' , 'http://i00.i.aliimg.com/photo/v2/767747426_2/2013_Power_bank_high_quality_portable_power.jpg' , 'http://i00.i.aliimg.com/photo/v2/767747426_3/2013_Power_bank_high_quality_portable_power.jpg' , 'http://i00.i.aliimg.com/photo/v2/767747426_4/2013_Power_bank_high_quality_portable_power.jpg' , 'http://i00.i.aliimg.com/photo/v2/767747426_5/2013_Power_bank_high_quality_portable_power.jpg' , 'http://i00.i.aliimg.com/photo/v2/767747426_6/2013_Power_bank_high_quality_portable_power.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); 2013 Power bank, high quality portable power bank 12000mAh car port