Welcome to ECOL - Join Free - Sign In
electric heating reaction kettle
electric heating reaction kettle
Supplier Info
[China Supplier]
Contact Person : Mr. Wang Hui
Tel : 86-510-85950865,13706185292
Fax : 86-510-85950802
Product Detail
1.acid-resisting 2.Resistance to high temperature 3.Wear resistance 4.resistant to corrosion

About us

  We specialized in designing and manufacturing different kinds of kettles in china with the experience of more than 15 years,We have sucessfully reached many deals with some of the Asian countries.We help our customer develop special kettles for their application and OEM service offered. Your visit will be specially welcomed.

About the product

1.Composite parts

(1).The reaction kettle consists of body, kettle lid, jacket, mixer, gear, shaft seal and bearing, etc.

Mixing form :

 (2).Anchor type:

 paddle, turbine, push type or framecan use multilayer agitating vane when the high diameter is large

 (3).Heating mode:

Electric heating, hot water heating, heat conduction oil circulation heating, far infrared heating, f (inside) coil heating(4).Cooling way:

Jacket cooling and kettle double pipe cooling, agitating vane form

2. classification

(1)Tai glass lining reaction kettle

suitable field: Used in petroleum, chemical industry, food, medicine, pesticides, scientific research, and other industries

(2).JCT multi-function dispersion reaction kettle

Is used to finish polymerization, condensation, vulcanization, alkylation, hydrogenation,chemical process and organic dyes process.

(3). Stainless steel reaction kettle

For thick and grain material all can achieve high mixing effect

(4). Steel liner PE reaction kettle

suitable field: Acid, alkali, salt and most alcohols, Liquid food and drug refiningideal replacement for rubber, glass reinforced plastics, stainless steel, titanium steel, enamel, plastic welding plate

(5). Steel liner ETFE reaction kettle

Is the solution of high temperature dilute sulphuric acid, hydrofluoric acid, hydrochloric acid and various organic acids corrosion problems

(6). Unsaturated polyester resin full set of equipmentThe key equipment to produce unsaturated polyester resin, phenolic resin, epoxy resin, ABS resin, paint

(7). PCF series small test autoclave

suitable field: High speed and low speed, low viscosity material mixing

(8). Empirical formula special reaction kettle

suitable fields: ew materials, energy, environmental engineering and other areas of organic synthesis, hydrothermal synthesis, crystal growth or sample digestion extraction3.Product maintance

(1).installation

The reaction kettle should be installed in high pressure operation which in accordance with the explosion protection requirements.Should replace many sets of equipent separately,there is blast security wall between each two sets. Each operating room are due to has outdoor channel, should guarantee the equipment well ventilated When there is a explosive media.

(2).Please purchase and add the conduction oil(won't contain any water)according to the working temperature.Open the jacketed upper filler and oil level mouth when adding the oil,don't put filler screw die lest produce pressure after adding process.

(3).Body, still cover installation and sealThe the gasket or cone shoule be contact with he circular arc line and to make them fully pressed through tightening the main nut to achieve good sealing effect.It can be used for tens of thousands of times more if was properly operated.

(4).Should install the Valves, pressure gauge and relief valve through tighten the positive and negative nutto achieve good sealing effect.The sealing surface of the two connection should not rotated relatively, to all the screw connection parts in the assembly, shall be blotted out lubricant or oil mixed with graphite, lest bite dead.

(5).Passing a certain amount of nitrogen mainting 30 mins after installation to lest leak. please use soap suds to find line, nozzle leakage point and discharge off the gas and screw up if found to have leakage.

(6).Use the water to cool through cooling coil.Speed cool is banned, in case of excessive temperature stress, cause cooling coil, body produce crack.When the working temperature in the kettle is more than 100 °C, magnetic stirrer and water jacket between the still cover should pass cooling water, guarantee the water temperature less than 35 °C, in order to avoid magnetic steel demagnetization.

(7). After the reaction, first for cooling,then drain the gas in the kettle to outdoor through pipeline,make the kettle internal pressure drop to atmospheric pressure.It is strictly prohibited to take pressure remove,then loosen off Lord bolt, nut symmetrically,  then carefully take down still cover (or rising kettle cover) in support, should pay special attention to protect sealing surface in the cover discharging process.

(8).The cleaning inside the kettle

Use leaner (using leaner should pay attention to avoid subject material produces corrosion) to clear the body and residue of the sealing surface every time after operation.

specification

practical capacity(L)

Dia Of Shell(mm)

heat transfer area of outer coil pipe(M2)

heat transfer area of inner coil pipe(M2)

Motor Power(kw)

500L

550

900

2.438

2

2.2

1000L

1100

1100

2.867

2.6

4

1500L

1650

1200

3.537

3.1

4

2000L

2200

1300

4.165

3.8

5.5

3000L

3300

1500

5.569

5.4

7.5

6000L

6600

1800

10.323

8.7

15

10000L

11000

2200

50.345

10.9

22

20000L

22000

2400

101.679

13.8

55

electric heating reaction kettle

Related Products
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.