Nickel 99.9/ pure nickel/ micron metal mesh
Nickel powder:
Fsss (μm): 1.51-5.00; Apparent Density (g/cm3): 0.60-1.90;
O %: ≤0.50; C %: ≤0.04
widely used in high-performance cemented carbide, powder metallurgy, etc.
Grade | Nickel powder | ||||||||||||||||||||
Ni ≥ | Impurity≤ ppm | ||||||||||||||||||||
FSSS (μm) | D50 (μm) | AD (g/cm3) | O % | C % | Co | Cu | Fe | Ca | Mg | Pb | Zn | Cd | Mn | Na | Al | Li | Cr | Si | S | ||
FNiH-1a | 99.9% | 1.00~1.50 | ≤8.00 | 0.50~0.90 | ≤0.50 | ≤0.03 | 20 | 20 | 50 | 50 | 30 | 30 | 20 | 20 | 20 | 50 | 20 | 10 | 20 | 10 | 50 |
FNiH-1b | 50 | 50 | 80 | 80 | 80 | 50 | 50 | 50 | 50 | 80 | 50 | 30 | 50 | 30 | 80 | ||||||
FNiH-2a | 1.51~3.00 | ≤10.00 | 0.60~1.20 | ≤0.40 | ≤0.03 | 20 | 20 | 50 | 50 | 30 | 30 | 20 | 20 | 20 | 50 | 20 | 10 | 20 | 10 | 50 | |
FNiH-2b | 50 | 50 | 80 | 80 | 80 | 50 | 50 | 50 | 50 | 80 | 50 | 30 | 50 | 30 | 80 | ||||||
FNiH-3a | 3.01~5.00 | ≤15.00 | 1.10~1.90 | ≤0.30 | ≤0.02 | 20 | 20 | 50 | 50 | 30 | 30 | 20 | 20 | 20 | 50 | 20 | 10 | 20 | 10 | 50 | |
FNiH-3b | 50 | 50 | 80 | 80 | 80 | 50 | 50 | 50 | 50 | 80 | 50 | 30 | 50 | 30 | 80 | ||||||
Note: 1)The content of Ni is calculated by the subtraction method, the subtraction elements are other Metals, C and S. 2)Grade a: Maximum Content of Impurity≤0.050%; The Single Impurity of Element≤0.005% Grade b: Maximum Content of Impurity≤0.080%; The Single Impurity of Element≤0.008% |
99.95%, nickel metal powder/1.0-5.00 micron