Hot! Large Diameter PVC Pipe/ PVC Tube ltd:
Specification:
1.OD:20-800mm;2.Pressure:0.63-2.5mpa;3.Color:grey/white etc.;4.ISO Certification;
5. Joint way: solvent with glue joint end/ Socket end/ spigot- soocket end with seal ring;
Applicable Places for PVC-U Pipes and fittings:
1. Water Supply Works;
2. Real Estate Construction ;
3. Well Drilling Works;
4. Chemical Factories;
5. Paper Mill;
6. Acidifying & Fermenting Plants;
7. Electroplating Factories;
8. Agricultural Ground;
9. Mine Fields;
10. Cultvation Industry;
11. Expressway Construction;
Properties of Products
1. Light weight
The weight per unit is only 1/6 of the cast-iron pipes,so the transport is quite convennient.
2. High strength
The strength can get to 45Mpa.
3. Low resistance
The internal surface of the pipe is smooth with no dirt and no blickage.The loss is 30% lower
than that of the cast-iron pipes.
4. Corrosion reistance
It has a good quality of acid resistance,alkali resistance,chemicals resistance and electro-
Chemistry resistance,so the point of corrosion will not occur during the use.
5. Easy instal lation
It adopts the glue and soft joining.Therefore,the installation is quite easy and the sealing is
Reliable
6. Long service life
The service time can reach more than 50 years nuder the normal working pressure.
7. Low cost
The cost of the transport and instal lation is low,and the total engineering cost is 30-40% lower
than of the cast-iron pipes.
8. Innocuity and sanitation
The product conforms to the standards of the drink water and water transported has no second pollu-
tion.
Our Idea for Operation
Demands from clients orient our business and service
Our company specializes in producing different kinds of PVC/UPVC pipe and pipe fittings ,with the advantage of high quality and reasonable price,of course the good service.We sincerely hope to establish long time cooperation with you.Your inquiry will be replied within 2 working days.
Directions for installation
Connecting the soft joining pipes and fittings:
At first, clean the inside wall of the extended interface pipes and the outside one of the plug-in part of the vertical pipes. Then measure the length of the extended interface and make a mark on the plug-in vertical pipes.(The marked length should be shorter than the actually measured one ) Thirdly, turn the rubber ring into the fillister of the extended interface.(Make the side of the rubber ring with a bevel outward and manicure the plug-in pipes into a bevel with a steel file or a grinding wheel. The products of our factory have the bevel surface automatically.) Lubricate the rubber ring and the plug-in part of the vertical pipes.Finally, insert the plug-in part of the vertical pipes into the extended interface and place it in the marked position with a line machine.(Either use a line machine or a lever during the process of installation in terms of the practical situation.
INSTALL:
Product Show
Hot Large Diameter PVC Pipe