Welcome to ECOL - Join Free - Sign In
HXW128 Plastic Injection Moulding Machine
HXW128 Plastic Injection Moulding Machine
Supplier Info
[China Supplier]
Contact Person : Ms. Chen Angela
Tel : 86-574-56178858
Fax : 86-574-56178108
Product Detail
Clamp force:128 tons with Variable pump, power and energy saving. Shot weight 143 to 206 gram

Main specification of HXW128

Screw A

Screw B

Screw C

Injection Unit

Screw Diameter

mm

35

38

42

Screw L/D Ratio

L/D

23.8

22

19.9

Shot Volume (theoretical)

CM³

154

181

222

Injection Weight (PS)

g

143

168

206

oz

5.0

5.9

7.2

Injection Rate

g/s

87

102

126

Plasticizing Capacity

g/s

11

13

15

Injection Pressure

MPa

219

186

152

Screw Speed

rpm

200

Clamping Unit

Clamp Force

KN

1280

Toggle Stroke

mm

350

Max. Mould Height

mm

450

Min. Mould Height

mm

150

Space Between Tie Bars (W×H)

mm

410×370

Ejector Force

KN

45

Ejector Stroke

mm

120

Ejector Numbers

n

5

Others

Max Pump Pressure

MPa

16

Pump Motor Power

kW

13

Heater Power

kW

9.3

Machine Dimension (L×W×H)

m

4.34×1.29×1.86

Machine Weight

t

3.3

Oil tank capacity

L

235

Standard equipment:

1) Double cylinder balancing injections2) High-torque oil-motor preplasticizing3) Five pivots minus relief angle, double toggles, machine hinge mold locking4) Cabinet-type holder integrates the mold plate5) Oil motor driven gear mold adjusting6) Storage-type grease lubricating7) Pressure and flow whole-proportion running8) High-performance, low-noise oil pump9) Multi-step pressure and speed adjusting10) High-precision position linear transducer11) Digital memory for mold groupInjection unit: 1) Four injection pressures and speeds with three additional pressures and speeds2) Suck back function3) Cold start protection4) Pre-suck back function5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control6) Temperature control7) Heating Status indicationClamping unit: 1) Three clamp close and open pressures and speeds2) Mold protection function3) Hydraulic ejector stroke controlled by transducer4) Automatic hydraulic die-height adjustment driven by planetary gears system5) Adjustable support under moving platen6) Automatic high pressure toggle lubrication with low oil level alarm7) Mechanical, electrical and hydraulic safety interlock devices8) Linear displacement transducer controls clamping positionOther parts: 1) Independent core in / out pressure and speed2) Hydraulic unscrewing sequence3) Hydraulic oil high temperature alarm4) System pressure gauge5) Shot counter and reset function6) Malfunction alarm light7) Self-diagnostic function8) Emergency stop buttons placed both front and rear of the machine to provide easy access

HXW128 Plastic Injection Moulding Machine

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.